Rechercher

This part of ISO 13999 specifies an impact cut test for use on fabric, leather and other materials used in protective clothing materials, gloves and arm guards. This test assesses the resistance of the test specimen to cutting by a sharp, straight knife-edge after the point of the test knife has perforated the test specimen. The length of the cut produced by the particular impact energy is…

Is applicable to portable voltage detectors with or without a built-in power source to be used on electrical systems for voltages of 1 kV to 36 kV a.c., and frequencies from 15 Hz to 60 Hz. This part applies only to resistive voltage detectors used in contact with the part to be tested, as a single unit or as a separate device completed by an adaptable insulating pole covered in IEC 60855 or IEC…

This International Standard specifies the procedure to be applied in analysing the results of speed trials for ships, with reference to the effects which may have an influence upon the speed-power-revolutions relationship. The applicability of the International Standard is limited to commercial ships of the displacement type. The instrumentation to be used in the speed trials is not specifically…

This part of ISO 10303 specifies the use of the integrated resources necessary for the scope and information requirements for Technical Data Packages (TDPs) (see 3.5.28) to be exchanged among product data management systems. Each enterprise uses content, format, and the level of configuration control as parameters when establishing its product exchange or access requirements among business…

Provides common outline drawings and dimensions for all types of structures and composed materials of fine-pitch land grid array whose terminal pitch is less than, or equal to, 0,80 mm and whose package body outline is rectangular.

This International Standard specifies technical requirements for windows, portlights, hatches, deadlights and doors on small craft of hull length up to 24 m, taking into account the type of craft, its design category, and the location of the appliance. The appliances considered in this International Standard are only those that are critical for the craft's watertightness, i.e. those that…

Gives the requirements for sleeving having the property of expanding its internal diameter when compressed longitudinally and thereafter returning to its initial diameter after release of the compressing force. This expandable braided textile sleeving, uncoated, is constructed of ethylene chlorotrifluoroethylene (E-CTFE) monofilament yarns suitably processed to provide the mechanical ability to…

This International Standard specifies two methods, i.e. flow injection analysis (FIA) and continuous flow analysis (CFA), for the determination of soluble silicate ions in various types of water (such as ground, drinking, surface, leachate and waste water). Both methods are applicable to the determination of a mass concentration of silicate (SiO 2) ranging from 0,2 mg/l to 20 mg/l (with working…

This International Standard specifies the physical, mechanical, packaging and labelling requirements for curing polymerizing radio-opaque and non-radio-opaque resin cements based on poly(methacrylic acid esters). It applies to two types of cement, intended respectively for use with a syringe or in the dough state, for the fixation of internal orthopaedic prostheses and supplied as units…

This International Standard specifies manufacturing, testing, and marking requirements for solid-section fork arms, for quantity production and with all types of mounting. These include but are not limited to, hook, shaft or pin, bolt-on and roller type fork arms.