Rechercher

1. SCOPE 1.1 This standard applies to three grades of kerosene-type aviation turbine fuel, consisting entirely of petroleum-derived hydrocarbons, naturally occurring non-hydrocarbons and additives as specified herein. Kerosene-type aviation turbine fuels are distillates having a minimum flash point of 38°C. Grade JET A has a maximum freezing point of -40°C, and Grade JET A-1 and Grade F-34 have…

1. Scope 1.1 This standard contains requirements and test methods for wood fibre thermal insulation manufactured in the form of faced or unfaced panels. 1.2 The standard covers four types of wood fibre insulation on the basis of their material properties. (a) Type I - Preformed insulation in the form of boards, sheets, or panels without a face or coating. (b) Type II -…

1. Scope 1.1 This standard applies to high-flash type aviation turbine fuel consisting entirely of petroleum-derived hydrocarbons, naturally occuring non-hydrocarbons and additives as specified herein. 1.2 This standard describes a military grade fuel normally used in naval operations whose product quality parameters are influenced by international military standardization agreements. F-44…

This National Standard of Canada is based on International Standard CEI/IEC 60730-1:1999, (third edition, 1999-04). 1 Scope and normative references 1.1 In general, this standard applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use…

1.1 Scope 1.1.1 This standard applies to newly produced gas fired-duct furnaces and unit heaters with input rates up to and including 10,000,000 Btu/h (2 931 KW) constructed entirely of new, unused parts and materials: a. For use with natural gas with inlet gas pressures up to and including 5.0 psi (34.5 kPa); b. For use with liquefied petroleum gases; and c. Convertible…

1.1 Scope 1.1.1 This standard applies to newly produced gas food service equipment providing coverage for ranges and unit broilers, baking and roasting ovens, counter appliances, deep fat fryers, kettles, steam cookers, steam generators, (see Part IV, Definitions) hereinafter referred to as either (1) "appliances," constructed entirely of new, unused parts and materials for use in food…

1. Domaine d'application B45.0-99 Exigences générales relatives aux appareils sanitaires 1.1 Cette norme vise les appareils sanitaires suivants : a) baignoires; b) éviers de cuisine et de bar; c) lavabos; d) cuves à lessive; e) cabines et bacs de douche; f) fontaines et refroidisseurs; g) toilettes; h) bidets; i) urinoirs; j) toilettes sans recirculation et réservoirs de…

This part of ISO 13999 specifies an impact cut test for use on fabric, leather and other materials used in protective clothing materials, gloves and arm guards. This test assesses the resistance of the test specimen to cutting by a sharp, straight knife-edge after the point of the test knife has perforated the test specimen. The length of the cut produced by the particular impact energy is…

Is applicable to portable voltage detectors with or without a built-in power source to be used on electrical systems for voltages of 1 kV to 36 kV a.c., and frequencies from 15 Hz to 60 Hz. This part applies only to resistive voltage detectors used in contact with the part to be tested, as a single unit or as a separate device completed by an adaptable insulating pole covered in IEC 60855 or IEC…

This International Standard specifies the procedure to be applied in analysing the results of speed trials for ships, with reference to the effects which may have an influence upon the speed-power-revolutions relationship. The applicability of the International Standard is limited to commercial ships of the displacement type. The instrumentation to be used in the speed trials is not specifically…