Design and Manufacture of Packaging for the Transportation of Infectious Substances, Diagnostic Spec...
1. SCOPE
1.1 Organization and Content - This standard sets out requirements for the design and manufacture of packaging used for the transportation of infectious substances, diagnostic specimens, biological products or (bio) medical waste. There are three categories of packaging: Type 1A (UN Standard Infectious Substance Packaging), Type 1B and Type 1C. UN Standard Infectious Substance Packaging…
Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General - Per...
This National Standard of Canada is based on International Standard CEI/IEC 60871-1:1997 (second edition, 1997-10).
1 Scope and object
This part of IEC 60871 is applicable to both capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems having a rated voltage above 1 000 V and frequencies of 15 Hz to 60 Hz.
This part of IEC…
Anaesthetic and Respiratory Equipment - Tracheal Tubes and Connectors
This National Standard of Canada is based on International Standard ISO 5361:1999, first edition).
1 Scope
This International Standard specifies requirements for the dimensions, basic properties and method of size designation of the most commonly used types of oro-tracheal and naso-tracheal tube made of plastics materials and/or rubber (plain and cuffed), and requirements for tracheal tube…
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 ...
Gives the requirements for sleeving having the property of expanding its internal diameter when compressed longitudinally and thereafter returning to its initial diameter after release of the compressing force. It is constructed of polyethylene terephthalate monofilament yarns suitably processed to provide the mechanical ability to conform in the manner described above. These sleevings have been…
Flexible insulating sleeving - Part 1: Definitions and general requirements
Applicable to flexible insulating sleeving primarily for insulating conductors and connectors of electrical apparatus. Some of the types of sleeving are also suitable for binding, identification, environmental sealing and mechanical protection. This standard is not applicable to coated papers. Materials which conform to this specification meet established levels of performance. However, the…
Electromagnetic compatibility (EMC) - Part 2-12: Environment - Compatibility levels for low-frequenc...
This part of IEC 61000 is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz, with an extension up to 148,5 kHz specifically for mains signalling systems. Compatibility levels are specified for electromagnetic disturbances of the types which can be expected in public medium voltage power supply systems, for guidance in: a) the limits to be set for disturbance…
Industrial fans — Specifications for balance quality and vibration levels
ISO 14694:2003 gives specifications for vibration and balance limits of fans for all applications except those designed solely for air circulation, for example, ceiling fans and table fans. However, it is limited to fans of all types installed with a power of less than 300 kW or to commercially available standard electric motor with a maximum power of 355 kW (following an R20 series). For fans of…
Safety of products and materials in contact with drinking water
1 PURPOSE
This standard specifies the requirements that products and materials in contact with drinking water shall conform to in order to preserve drinking water quality. This standard considers the incidence of products and materials in contact with drinking water on public health and the aesthetic quality of the water.
This standard specifies the methods for evaluation of products and…
Electromagnetic compatibility (EMC) - Part 6-6: Generic standards - HEMP immunity for indoor equipme...
This part of IEC 61000 sets high-altitude electromagnetic pulse (HEMP) immunity requirements for electrical and electronic equipment intended for use indoors. The indoor HEMP environment depends on the electromagnetic shielding quality of a facility and the level of protection against the conducted environment. This standard is intended for all facility types including residential, commercial,…
Household and Similar Electrical Appliances - Safety - Part 1: General Requirements
This National Standard of Canada is based on International Standard CEI/IEC 60335-1:2001, fourth edition, 2001-05.
1 Scope
The object of this Part 1 Standard is to specify general electrical safety requirements for certain products.
The requirements of this Standard apply to a specific end-use product when it is explicitly referred to by that product standard. Each individual product…