Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type s...
IEC 60191-6-13:2007 gives a design guideline of open-top-type semiconductor sockets for Fine-pitch Ball Grid Array ("FBGA" hereafter) and Fine-pitch Land Grid Array ("FLGA" hereafter). This standard is intended to establish the outline drawings and dimensions of the open-top-type socket out of the test and burn-in sockets applied to FBGA and FLGA.
Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder - Marine search and r...
IEC 61097-1:2007 specifies the performance standards and type testing of marine radar transponders used in search and rescue operations at sea (SART), as required by Regulation 6.2.2 of Chapter III, and 7.1.3 and 8.3.1 of Chapter IV of the 1988 amendments to the 1974 International Convention for Safety of Life at Sea (SOLAS), and which is associated with IEC 60936 (Shipborne radar) and IEC 60945…
Information technology - Magnetic stripes on savingsbooks
ISO/IEC 8484:2007 specifies the characteristics and location of a magnetic stripe on a savingsbook and the use of such savingsbooks for international interchange. Compatibility with international interchange systems is provided through the requirements of ISO/IEC 8484:2007, enabling a savingsbook with a magnetic stripe to be read and possibly encoded in a device that is compatible with reading…
Information technology — Magnetic stripes on savingsbooks
ISO/IEC 8484:2007 specifies the characteristics and location of a magnetic stripe on a savingsbook and the use of such savingsbooks for international interchange. Compatibility with international interchange systems is provided through the requirements of ISO/IEC 8484:2007, enabling a savingsbook with a magnetic stripe to be read and possibly encoded in a device that is compatible with reading…
Rubber — Determination of adhesion to rigid materials using conical shaped parts
ISO 5600:2007 specifies a method for the determination of the static vulcanized adhesion strength of rubber compounds to rigid materials. The test piece is composed of two conical ends of the rigid material, joined by a cylinder of rubber.
The adhesion is obtained by a bonding system which can include not only the rigid material and the rubber compound, but other elements such as thin alloy…
Information technology - Data interchange on 120 mm and 80 mm optical disk using +R DL format - Capa...
ISO/IEC 25434:2007 specifies the mechanical, physical and optical characteristics of 120 mm recordable optical disks with capacities of 8,55 Gbytes and 17,1 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written once and read many times…
Information technology — Data interchange on 120 mm and 80 mm optical disk using +R DL format — Capa...
ISO/IEC 25434:2007 specifies the mechanical, physical and optical characteristics of 120 mm recordable optical disks with capacities of 8,55 Gbytes and 17,1 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. The data can be written once and read many times…
Paper, board and pulps — Measurement of diffuse radiance factor
ISO 2469:2007 describes the general procedure for measuring the diffuse radiance factor of all types of pulp, paper and board. More particularly, it specifies in detail in Annex A the characteristics of the equipment to be used for such measurements, and in Annex B the procedures to be used for calibrating that equipment.
ISO 2469:2007 may be used to measure the radiance factors and related…
Thermal-insulating materials — Determination of long-term water absorption by diffusion
ISO 20393:2007 specifies equipment and procedures for determining the long-term water absorption of test specimens by diffusion. It is intended for use with thermal-insulation products. It is designed to simulate the absorption of water by products subjected for a long period of time not only to high relative humidity, approximating to 100 %, on both sides but also to a water vapour pressure…
Gives guidelines for scintillation detectors nomenclature (identification) and standard dimensions of scintillators. Is applicable to all types of solid organic and inorganic scintillators used in detectors for scintillation counting and spectrometry. The purpose is to facilitate interchangeability of non-encapsulated scintillators and to facilitate comparisons of measurements with encapsulated…
