STANDARD FOR LINING SYSTEMS FOR EXISTING MASONRY OR FACTORY-BUILT CHIMNEYS AND VENTS
1.1 This Standard covers lining systems for existing masonry chimneys, which may or may not
incorporate a liner of fire-clay tile, and existing factory built chimneys and vents.
1.2 Lining systems shall be classed as follows:
Class 1 – For the venting of gas-fired appliances where the temperature of the flue-gas
products is 135 °C or above, but does not exceed 245 °C;
Class 2 – For the…
STANDARD FOR LINING SYSTEMS FOR NEW MASONRY CHIMNEYS
1.1 These requirements cover lining systems for new masonry chimneys.
1.2 Liners are for use with gas, liquid and solid fuel fired residential appliances and building heating
equipment, where the flue gas temperatures normally do not exceed 650 °C. They are intended for use
in accordance with the National Building Code of Canada, CSA B139 – Installation Code for Oil Burning
Equipment, CSA…
Enterprise-control system integration — Part 5: Business to manufacturing transactions
IEC 62264-5:2016 defines transactions in terms of information exchanges between applications performing business and manufacturing activities associated with Levels 3 and 4. The exchanges are intended to enable information collection, retrieval, transfer and storage in support of enterprise-control system integration. This part of IEC 62264 is consistent with the IEC 62264-2 and IEC 62264-4…
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-0...
IEC 61010-2-011:2016 specifies particular safety requirements for the following types a) to c) of electrical equipment and their accessories, wherever they are intended to be used, whenever that equipment incorporates REFRIGERATING SYSTEMS whether an integral part of, or remote to the equipment and the equipment is in direct control of the REFRIGERATING SYSTEM. This Part 2 details all the…
Lamp controlgear - Part 2-13: Particular requirements for d.c. ora.c. supplied electronic controlgea...
IEC 61347-2-13:2014+A1:2016 specifies particular safety requirements for electronic controlgear for use on d.c. or a.c. supplies up to 1 000 V (a.c. at 50 Hz or 60 Hz) and at an output frequency which can deviate from the supply frequency, associated with LED modules. Controlgear for LED modules specified in this standard are designed to provide constant voltage or current at SELV or higher…
Enterprise-control system integration - Part 5: Business to manufacturing transactions
IEC 62264-5:2016 defines transactions in terms of information exchanges between applications performing business and manufacturing activities associated with Levels 3 and 4. The exchanges are intended to enable information collection, retrieval, transfer and storage in support of enterprise-control system integration. This part of IEC 62264 is consistent with the IEC 62264-2 and IEC 62264-4…
Paints and varnishes — Standard panels for testing
ISO 1514:2016 specifies several types of standard panels and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints, varnishes and related products.
Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Pa...
ISO 23551-10:2016 specifies the safety, design, construction and performance requirements and testing for automatic vent valves (hereafter referred to as "valves") for use with gas burners, gas appliances burning one or more gaseous fuels.
It is applicable to valves with declared maximum inlet pressures up to and including 500 kPa (5 bar) of nominal connection sizes up to and including…
Mission operations — MAL space packet transport binding and binary encoding
The scope of ISO 21082:2016 is the specification of the binding in terms of technology mapping to the Space Packet Protocol of:
a) MAL message;
b) MAL Transport Interface.
The MAL Blue Book (reference [2]) specifies the MAL protocol in an abstract way, i.e., without defining the concrete protocol data units. The MAL Space Packet Transport Binding and Binary Encoding specifies:
a) a…
Turbocompresseurs — Code d'essais des performances — Essai de réception simplifié
L'ISO 18740 :2016 est applicable à tout groupe compresseur centrifuge d'air à vitesse fixe (constante), à refroidissement liquide et comprenant un élément de compression centrifuge de tout type entraîné par un moteur électrique.
Elle définit et décrit les essais de réception des groupes compresseurs d'air entraînés électriquement, de types standards, construits selon des…