1.1
This Standard covers the design, construction, operation, and maintenance of
oil and gas industry pipeline systems, which convey
(a) liquid hydrocarbons, including crude oil, multiphase fluids, condensate,
liquid petroleum products, natural gas liquids, and liquefied petroleum gas;
(b) oilfield water;
(c) oilfield steam; or
(d) gas.*
*Designers are cautioned that the requirements in…
Dental Rotary Instruments - Nominal Diameters and Designation Code Number
This National Standard of Canada is equivalent to International Standard ISO
2157:1992.
1 Scope
This International Standard specifies the nominal diameters of the working
parts of dental rotary instruments, for example burs, laboratory burs, grinding
instruments, diamond instruments, mandrels, etc. and the corresponding
designation. It does not cover the diameters of root canal…
1. Scope
1.1
This Standard applies to the protection of persons from the hazards arising
from the use of mobile or stationary machinery. It provides the criteria to be
observed and the description, selection, and application of guards and safety
devices. Where a current CSA Standard exists for a specific type of machinery
(eg. Z114, CAN/CSA-Z143), it shall take precedence over this…
Safety of household and similar electrical appliances - Part 2: Particular
requirements for commerc...
This National Standard of Canada is based on International Standard CEI/IEC 335-2-36:1993.
1. Scope
This clause of part 1 is replaced by:
This standard deals with the safety of electrically operated commercial cooking
ranges, ovens, hobs, hob elements and similar appliances not intended for
household use, their rated voltage being not more than 250 V for single phase
appliances…
Steel - Surface finish of hot-rolled plates and wide flats - Delivery requirements
This National Standard of Canada is based on International Standard ISO 7788-1995.
1 Scope and Field of Application
This CSA Standard specifies delivery requirements which apply to the surface finish of hot-rolled plates and wide flats rolled on reversing mills, with nominal thicknesses equal to or less than 150 mm.
For plates with a thickness greater than 150 mm and for special…
1. Scope
1.1
This Standard provides requirements for material selection, design, and
construction of fixed concrete offshore structures. It is intended for use by
engineers experienced in the design and construction of offshore structures.
Safety of household and similar electrical appliances - Part 2: Particular requirements for commerci...
1. Scope
This clause of Part 1 is applicable except as follows:
1.1 Replacement:
This standard applies to electrically operated commercial griddles and griddle grills not intended for household use.
The electrical part of appliances making use of other forms of energy is also within the scope of this standard and the influence of the non-electrical parts on…
Safety of household and similar electrical appliances - Part 2: Particular requirements for wet and ...
1 Scope
This clause of Part 1 is applicable except as follows:
1.1 Replacement:
This standard applies to electrical motor-operated vacuum cleaners with a power input up to 10 kW and includes appliances and stationary equipment specifically
designed for wet suction, dry suction, or wet and dry suction for industrial and commercial use with or without attachments, for example for suction…
Certification of Nondestructive Testing Personnel (Police and Security
Radiography Method)
1.1
This standard provides recommended course guidelines for the minimum essential
training of, and a procedure for the certification of two levels of personnel
to perform police and security radiography.
1.2
This standard covers only those radiographic testing procedures and
techniques in which training has been provided in accordance with the course
requirements and guidelines established in…