Rechercher

Affiner les résultats
Code de la Classification internationale pour les normes (ICS)
Source
Code de l’organisme d’élaboration de normes (OEN)
Langue
Statut
Code de la Norme nationale du Canada (NNC)
Date de publication

De

à

Affichage 1321 - 1330 de 1638
Corrigendum 1 - Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages e...
Applies to portable voltage detectors with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 420 kV a.c. and frequencies from 15 Hz to 60 Hz. For the time being, it has been identified that : - For voltage levels up to 52 kV, the actual standard can be used in its entirety ; - For voltage levels above 52 kV, electric testing procedures are questionable…
Éditeur :
IEC
Statut :
Révisé
Date de publication :
1999-07-22
Code(s) de l'ICS :
13.260; 13.260
Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies f...
This standard applies to type-tested assemblies (TTA) intended for use on construction sites, i.e. temporary places of work to which the public do not generally have access and where building construction, installation, repairs, alteration or demolition of property (buildings) or civil engineering (public works) or excavation or any other similar operations are carried out. These assemblies may…
Éditeur :
IEC
Statut :
Révisé
Date de publication :
1999-07-15
Code(s) de l'ICS :
29.130.20
Non-destructive testing — Acoustic emission inspection — Secondary calibration of acoustic emission ...
This International Standard specifies a method for the secondary calibration of acoustic emission sensors as receivers of elastic waves at the surface of a solid medium. The International Standard is applicable to laboratory tertiary standard sensors and acoustic emission applications sensors. The secondary calibration yields the frequency response of a sensor to waves of a type normally…
Éditeur :
ISO
Statut :
Publié
Date de publication :
1999-07-14
Code(s) de l'ICS :
19.100
Thermal spraying — Quality requirements of thermally sprayed structures — Part 1: Guidance for selec...
This standard specifies guidelines to describe thermal spraying quality requirements suitable for application by the manufacturers using the thermal spraying process for coating new parts, for repair and maintenance. They are structured in the way that they can be used for any type of construction to be sprayed. These guidelines relate only to those aspects of the quality of the final…
Éditeur :
ISO
Statut :
Annulée
Date de publication :
1999-06-30
Code(s) de l'ICS :
25.220.20
Oil and Gas Pipeline Systems
1. Scope 1.1 This Standard covers the design, construction, operation, and maintenance of oil and gas industry pipeline systems that convey (a) liquid hydrocarbons, including crude oil, multiphase fluids, condensate, liquid petroleum products, natural gas liquids, and liquefied petroleum gas; (b) oilfield water; (c) oilfield steam; (d) carbon dioxide used in oilfield enhanced…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1999-04-29
Code(s) de l'ICS :
75.200
Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys
This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of nickel. This standard applies to the approval testing of welders for the fusion welding of nickel. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval…
Éditeur :
ISO
Statut :
Publié
Date de publication :
1999-04-21
Code(s) de l'ICS :
25.160.01
Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys
This standard specifies essential requirements, ranges of approval, test conditions, acceptance requirements and certification for the approval testing of welder performance for the welding of copper. This standard applies to the approval testing of welders for the fusion welding of copper. This standard is intended to provide the basis for the mutual recognition by examining bodies for approval…
Éditeur :
ISO
Statut :
Publié
Date de publication :
1999-04-21
Code(s) de l'ICS :
25.160.01
ABS Drain, Waste, and Vent Pipe and Pipe Fittings
1. Scope 1.1 This Standard applies to acrylonitrile-butadiene-styrene drain, waste, and vent (ABS-DWV) pipe, pipe fittings, and accessories such as factory-assembled expansion joints, closet flanges, and backwater valves. 1.2 This Standard includes requirements for materials, quality of work, dimensions and tolerances, impact strength, chemical resistance, water resistance, dimensional…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1999-03-30
Code(s) de l'ICS :
23.040.60; 23.040.60
PVC Drain, Waste, and Vent Pipe and Pipe Fittings
1. Scope 1.1 This Standard applies to poly (vinyl chloride) drain, waste, and vent (PVC-DWV) and chlorinated poly (vinyl chloride) drain, waste, and vent (PVC-DWV) pipe, pipe fittings, and accessories such as factory-assembled expansion joints, closet flanges, and backwater valves. 1.2 This Standard includes requirements for materials, quality of work, dimensions and tolerances, impact…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1999-03-30
Code(s) de l'ICS :
23.040.20; 23.040.20
Coextruded ABS/PVC Drain, Waste, and Vent Pipe
1. Scope 1.1 This Standard applies to coextruded thermoplastic drain, waste, and vent pipe with an outer layer of acrylonitrile-butadiene-styrene (ABS) and an inner layer of polyvinyl chloride (PVC) or with a outer and inner layers of acrylonitrile-butadiene-styrene (ABS) and a core of polyvinyl chloride (PVC), to be used with fittings, accessories, and solvent cement meeting the…
Éditeur :
CSA
Statut :
Annulée
Date de publication :
1999-03-30
Code(s) de l'ICS :
23.040.20; 23.040.20

Spacer