Rechercher

1. Scope 1.1 General This Standard applies to (a) reagents and apparatus for preparing dialysing fluid; (b) monitors of the dialysing fluid; (c) accessories for monitoring the extracorporeal blood circuit; and (d) blood pumps, infusion, and single needle systems. Notes: (1) Examples of reagents and devices included within the Scope of this Standard are dialysis concentrate and…

1. Scope 1.1 This Standard prescribes a method for determining heat outputs, appliance efficiencies, emission levels and composition, and flue gas flow rates for wood-fired appliances with a closed fire chamber. 1.2 For the purpose of this Standard, a wood-fired appliance with a closed fire chamber is one in which the air-fuel ratio is less than 30:1 by weight during the burning of at…

1. Scope 1.1 This Standard applies to stationary electric duct heaters for comfort heating rated at 600 V or less and 1000 kW and less, designed to be installed and used in nonhazardous locations in residential, commercial, and industrial applications, in ac cordance with the Canadian Electrical Code, Part I. Note: The Canadian Electrical Code, Part I, provides a limitation of 150 V to…

1. Scope 1.1 This Standard applies to insulating tubing that consists entirely of extruded compounds (see Table 1 for materials, sizes, and ratings) and also applies to heat-shrinkable tubing (with or without a meltable liner) intended for use in equipment designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I, at a voltage not exceeding 1000 V. 1.2…

Provides a means of measuring the contribution of roof-deck assembly components to the spread of fire on the underside of the roof deck.

1.1 This standard is intended to cover the complete general and dimensional data for nickel-plated nonadjustable wrenches used for tightening and loosening (Inch Series) bolts and nuts. 1.2 This standard does not include all types and sizes of the commodity indicated by the titles of this standard, nor all those commercially available, but includes only those generally used by the Federal…

It has the status of a horizontal standard in accordance with IEC Guide 108.

Contains standard sheets 1 to 11 for SAW filter outlines designated by Types SFA to SFG.

Specifies a method for the determination of compressive creep of rigid cellular plastics under specified conditions of load, temperature, relative humidity and time. Test specimes in form or rectangular parallelepipeds are placed between two flat plates and the specified load is applied as follows: procedure A) at standard conditions and procedure B) at agreed conditions of temperture and time.…