Rechercher

This standard establishes quality requirements for the soft cellular polyurethane materials intended to resist repeated pressures. Polyurethane foams are classified according to their type, density, firmness and burning behaviour*. This standard applies to polyurethane foams used for upholstery. It covers foam blocks, those cut into different shapes (bands, sheets, etc.) as well as…

1.1 Portée 1.1.1 La présente norme s'applique à la construction et au rendement des nouveaux composants du réseau d'alimentation en propane fournissant la force motrice des véhicules à moteur à combustion interne qui circulent sur les voies publiques. 1.1.2 La présente norme ne s'applique pas aux appareils fixes ni aux véhicules qui ne circulent pas sur les voies…

1. Scope 1.1 These requirements cover the construction and operation of 9 Litre stored pressure water type fire extinguishers. 1.2 Stored pressure water type fire extinguishers shall also comply with the requirements of the Standard for the Rating and Fire Testing of Fire Extinguishers, and Class D Extinguishing Media, CAN/ULC-S508. 1.3 A stored pressure water type fire…

This National Standard of Canada is equivalent to International Standard ISO 9004-1987. It describes a basic set of elements by which quality management systems can be developed and implemented. The selection of appropriate elements contained in this International Standard and the extent to which these elements are adopted and applied by a company depends upon factors such as market…

1.1 General This Standard specifies minimum requirements for stile and rail wood doors. The Standard provides definitions, tolerances, sizes, construction, types of doors, detailed requirements, grading, and testing methods. Note: This extract from CSA Standard O132.2-M1977 does not include requirements for flush doors (solid or hollow core) or moulded skin doors. 1.2 Classification…

1.1 This Standard specifies requirements for keyboards to be used throughout Canada for word, information, and data-processing applications. 1.2 This Standard defines the national keyboard layout (the primary keyboard layout) providing access to characters most commonly used in Canada (group 1 characters) and a secondary keyboard layout which, when combined with the group 1 characters,…

1. Scope 1.1 This Standard applies to motor-operated vacuum cleaners and blower cleaners, and to household use floor finishing machines to be employed in accordance with the Rules of the Canadian Electrical Code, C22.1, Part I and the National Electrical Code, ANSI/NFPA 70. 1.2 These requirements cover (1) household, commercial, and coin-operated vacuum cleaning machines and blower…

1.1 Applies to unitary or split system liquid source heat pumps with a maximum standard rated output of 35 kW per unit for residential applications and other small building applications of up to and including 1400 m² (15 000 ft²), using surface or ground water or coupled to an earth or lake loop as a thermal source or sink for the heating and/or cooling with or without a supplementary…

This National Standard of Canada is equivalent to International Standard ISo 9004-2:1991. This Part of ISO 9004 gives guidance for establishing and implementing a quality system within an organization. It is based on the generic principles of internal quality management described in ISO 9004:1987 and provides a comprehensive overview of a quality system specifically for services. This…

1.1 This Standard specifies the construction and testing of portable power cables normally used in applications where the cables are subject to frequent flexing, and installation is in accordance with CSA Standards CAN3-M421, Use of Electricity in Mines, and/or C22.1, Canadian Electrical Code, Part I. 1.2 The cable constructions specified in this Standard are suitable for use at a…