This standard applies to No. 1 opaque litho book paper, used for face and back
offset litho printing of books, magazines, periodicals, pamphlets, etc.
Printed matter may include text, line illustrations and 150 lines/cm halftones
in multicolours. A standard for permanence of paper is in the course of
preparation.
1.1
This standard applies to a low sheen latex interior finish for all types of
interior walls, either new or previously painted.
1.2
Paint complying with this standard is intended for application on walls and
ceilings. This paint is suitable for application over practically any type of
wall surface, including wallboard, gypsum board, dry plaster, cement, brick or
concrete block. For…
Selection and Use of Rigid Sterilization Containers
1.1
This standard defines essential elements for using containers (rigid
sterilization containers) that are designed for use in gravity, prevacuum, and
ethylene oxide sterilizers.
1.2
This standard addresses instrument sets used in rigid sterilization containers.
1.3 Inclusions
This standard addresses requirements for
(a) general characteristics of containers;
(b) testing prior to…
1.1
This standard applies to two types of low sulfur distillate fuel, Type A-LS and
Type B-LS required by high speed diesel engines (generally operating above 1200
r/min) that require low sulfur diesel fuel to meet emission control regulations.
1.1.1
Type A-LS is intended for use in engines such as urban transit buses and
passenger automobiles or when ambient temperatures require better…
1.1
This standard applies to a coating suitable for interior use over a fire
retardant base coat from the same manufacturer. It is not by itself fire
retardant but is intended for use as a topcoat over a fire retardant interior
coating conforming to CAN/CGSB-1.151.
1.2
This coating should not be used by itself where fire retardance is required,
but only as a companion topcoat over a…
1.1
This standard applies to an exterior coating of acrylic cellulose nitrate
lacquer for protecting metal and composites such as carbon, fibre/epoxy
fibreglass and aramid surfaces, particularly those of aircraft where resistance
to di-ester lubricating oil is required.
1.2
The lacquer is designed primarily for application over a primer conforming to
CAN/CGSB-1.158. However, it may be…
This standard applies to standard finish, white, No. 1 and No. 2 grade offset
paper for use in printing as defined in par. 7.2. A standard for permanence of
paper is in the course of preparation.
1.1
This standard applies to the material and fabrication requirements for
corrugated steel pipe and structural plate corrugated steel pipe products.
1.2
This standard applies to the use of corrugated steel pipe and structural plate
corrugated steel pipe for applications such as culverts, storm sewers, sanitary
sewers, subdrains, ground recharge systems, well casings, underpasses, stream…
1.1
This Standard applies to hydromassage bathtub appliances and associated
accessories for residential and commercial use, intented to be permanently
connected to a plumbing system and an electrical supply circuit of 250 V and
less (ie, 150 V maximum to ground), for use indoors in nonhazardous locations,
and for installation in accordance with the Rules of the Canadian Electrical
Code,…
Microfilm and Electronic Images as Documentary Evidence
1.1
This standard provides rules and guidelines for organizations to establish and
operate a credible image management program with the ability to demonstrate
that the resulting captured images are accurate reproductions of source
records.
1.2
This standard provides guidelines for the capture of images of business source
records and the secure storage of those images. In order to maximize the…
