Scope
1.1
This Standard specifies minimum safety and performance requirements for vacuum
devices (see Figure 1). Equipment may be driven by centrally powered piped
vacuum systems, fluids, electricity, or manually powered for a variety of
applications (see Figure 1).
Excluded from the Standard are
(a) central power supply (by vacuum/compressed air generation), piping systems
of…
Performance Specifications for Portable Whole Blood Glucose Monitor Systems for Use in Diabetes Mana...
1.1 Scope
This Standard specifies requirements for portable whole blood glucose monitor
systems, as defined in Clause 3.3 of this Standard, hereinafter referred to as
blood glucose monitor system(s), used to aid in the determination of an
individual's blood glucose concentration for the purpose of diabetes
management.
1.1.1 Aspects excluded from scope
This Standard does not address…
1. SCOPE
1.1 This standard applies to asbestos-cement pipe and couplings, primarily
suitable for conveying exhaust fumes from laboratory hoods and from certain
processes, for conveying treated air in ventilation systems and for sanitary
ventilation of sewage systems.
1.2 For cautionary notes on cutting, grinding, sanding or drilling of this
product, see par. 6.2.2 and 8.2.
1.3 The…
This standard sets out performance and dimensional requirements for rolls of
translucent pressure-sensitive cellulose acetate and plastic tape for permanent
mending of paper documents, books, maps, etc.
1.1
This Standard provides minimum requirements for the training of operators for
lift trucks Classes 1 to 7 inclusive.
Note: Due to the different design of vehicles classified as "Class 6", certain
Clauses in this Standard may not apply.
1.2
This Standard specifies the general medical and physical fitness requirements
for lift truck operators as well as the basic knowledge…
1.1 General
This Standard covers performance requirements for personal hearing protection
devices.
Note: A guide for the selection, fit, care, and use of hearing protectors as
required for an effective hearing conservation program is presented in Appendix
A.
1.2 Types
The following types of hearing protectors are covered in this Standard:
earplugs, earmuffs, and communication…
This National Standard of Canada is equivalent to International Standard ISO 9919:1992.
1.1 Scope
ISO 9919 is one of a series of International Standards based on IEC 601-1; in IEC 601-1 (the General Standard), this type of International Standard is referred to as a Particular Standard. As stated in 1.3 of IEC 601-1:1988, the requirements of this International Standard take precedence…
This Standard specifies the criteria for access systems - steps, ladders,
walkways, platforms, grab rails (handrails), grab handles, guardrails, and
enclosure entrance and exit openings - as they relate to aiding the operator
and servicemen in performing their functions on the machinery.
It applies to access systems to the operator's station and to service points on
earth-moving…
This National Standard of Canada is equivalent to International Standard ISO
5007:1989.
This Standard specifies a method for measuring and evaluating the effectiveness
of the seat in reducing the vertical whole-body vibration transmitted to the
operator of an agricultural tractor.
Vibration which reaches the operator other than through his seat, for example
that sensed by his feet on…
Operating Instrumentation - Mobile Machinery (EMM, FM)
This National standard of Canada is equivalent to International Standard ISO
6011:1987.
1. Scope
This Standard specifies the information to be obtained from the instruments on
the instrument panel by the operator in his normal position. It also specifies
the arrangement and colour distinction of this instrumentation in order to make
it possible to operate the machine in a safe and…
