Rechercher

This Part 1 of the standard specifies the key principles for the creation of symbol originals for use on equipment. In accordance with the intended meaning of the symbol originals, it contains rules for design such as shape and size, and also for preparation of the accompanying texts. It has the status of a horizontal standard in accordance with IEC Guide 108.

Establishes standard test procedures for photodiodes used in scintillation detectors and defines the parameters which shall be provided by the supplier for each type of photodiode.

1. SCOPE 1.1 This standard applies to fabric of four different masses per unit area (145 g/m², 150 g/m², 160 g/m² and 170 g/m²) made from yarns that are a blend of 65% polyester and 35% cotton. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety…

1. Scope 1.1 This special publication does not constitute a standard and is not mandatory in any way. It is written in mandatory language to accommodate its adoption by anyone wishing to do so. 1.2 This special publication outlines the requirements of a chain of custody process for forest products originating from a defined forest area (DFA) that is registered to CSA Standard CAN/CSA-…

This National Standard of Canada is equivalent to International Standard IEC 61965:2000. 1 Scope This International Standard is applicable to cathode ray tubes and cathode ray tube assemblies (hereinafter referred to as CRTs) which are intended for use as components in apparatus and which have integral protection with respect to the effects of implosion. These requirements apply to…

This National Standard of Canada is based on International Standard ISO 13256-1:1998. 1 Scope 1.1 This part of ISO 13256 establishes performance testing and rating criteria for factory-made residential, commercial and industrial, electrically-driven, mechanical-compression type, water-to-air and brine-to-air heat pumps. The requirements for testing and rating contained in this part of ISO…

This National Standard of Canada is based on International Standard ISO 13256-2:1998. 1 Scope 1.1 This part of ISO 13256 establishes performance testing and rating criteria for factory-made residential, commercial and industrial, electrically-driven, mechanical-compression type, water-to-water and brine-to-water heat pumps. The requirements for testing and rating contained in this…

1. Scope 1.1 General This standard provides requirements for the design, manufacture, construction, modification, operation, inspection, testing, and maintenance of passenger ropeways and conveyors. Requirements for abnormal or unusual conditions are not specifically provided for, nor are all the details of engineering and construction prescribed. It is intended that all work…

This National Standard of Canada is equivalent to International Standard ISO/TS 14798:2000. 1. Scope This Technical Specification establishes requiremetns and procedures for carrying out risk analysis for lifts (elevators), escalators and passenger conveyors. It is intended for use by experts, trained in this methodology, to determine equipment safety and performance or to develop…

1. Scope 1.1 This standard applies to polyester/cotton twill fabric with a durable press finish of three different masses per unit area: 170 g/m², 235 g/m² and 255 g/m². 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its…