Rechercher

Is applicable to avalanche breakdown diodes (ABDs) which represent one type of surge protective device component (hereinafter referred to as SPDC) used in the design and construction of surge protective devices connected to low-voltage power distribution systems, transmission, and signalling networks. Test specifications in this standard are for single ABDs consisting of two terminals. However,…

1. Scope 1.1 This Standard applies to permanent adhesive labels and nameplates intended for use indoors or outdoors on application surfaces that are essentially clean, smooth, flat, or simple curved.* * Refer to Appendix A. 1.2 This Standard includes requirements for legibility of text and other mandatory information and adhesion of the label when subjected to various environmental…

1. Scope 1.1 This standard states the design and performance requirements for protective clothing worn by firefighters', for protection against heat and flame encountered during fires and related life saving activities, and specifies methods for testing the materials and material assemblies used in the protective clothing. 1.2 The standard does not apply to specialized protective…

1. Scope 1.1 General This Standard provides rules and requirements for the design, fabrication, and erection of steel structures. The design is based on limit states. The term "steel structures" refers to structural members and frames that consist primarily of structural steel components, including the detail parts, welds, bolts, or other fasteners required in fabrication and…

1. Scope 1.1 This Standard applies to the lines and equipment of electric supply and communication utilities located entirely outside of buildings and fenced supply stations. 1.2 This Standard, which forms part of the Canadian Electrical Code, Part III, provides requirements for the construction of overhead systems. It includes electric supply and communication circuits installed…

This National Standard of Canada is equivalent to International Standard ISO/TR 10013:2001. 1. Scope This Technical Report provides guidelines for the development and maintenance of the documentation necessary to ensure an effective quality management system, tailored to the specific needs of the organization. The use of these guidelines will aid in establishing a documented system as…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60730-2-8:2000. 1. Scope This clause of part 1 is replaced as follows: Replacement: 1.1 This part 2-8 applies to electrically operated water valves for use in, on or in association with equipment for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60730-2-9:2000. 1. Scope This clause of part 1 is applicable except as follows: 1.1 Replacement: This part of IEC 60730 applies to automatic electrical temperature sensing controls for use in, on or in association with equipment for household and similar use, including electrical controls for heating, air-…

A440-00 Windows 1. Scope 1.1 This Standard applies to both fixed and operable windows that are factoryand intended for vertical installation in buildings. 1.2 This Standard applies to both fixed and operable windows installed in prime doors and to door transoms and door sidelites. 1.3 This Standard applies to combination and composite windows as limited by Clause 10.1.4. Mullions are tested…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8348:1996 (third edition, 1996-09-15). 1 Scope This Recommendation / International Standard defines the OS1 Network Service in terms of: a) the primitive actions and events of the Service; b) the parameters associated with each primitive action and event, and the form which they take; C) the…