Rechercher

1. Scope 1.1 This standard applies to inner tubes for pneumatic tires used on automobiles, trucks, motorcycles, agricultural, industrial and other ground equipment.

This Series of standards applies to common types of plumbing fixtures such as bathtubs, sinks, W.C.'s, etc., but does not apply to appliances such as clothes washers or W.C.'s used in recreational vehicles. The standards include dimensional requirements, performance requirements and tests, and marking requirements and apply to plumbing fixtures made of vitreous china, enamelled…

1. Scope 1.1 This Standard provides the minimum criteria for the design, erection and use of single membrane, unreinforced or reinforced air-supported structures. 1.2 This Standard is intended only for single independent air- supported structures and those which are contiguous with other structures and are attached through a common element. 1.3 This Standard does not apply to…

Specifies a method to determiine if a flammable material, when maintained at a selected equilibrium temperature and under the conditions of the test, gives off sufficient flammable vapour at this temperature to cause ignition on application of an external source of flame applied in a standard manner. The method is suitable for use over the temperature range 5 to 65 C.

1. Scope 1.1 This Standard applies to quick-connect terminals having nominal widths of 2.79 mm, 3.18 mm, 4.75 mm, 5.21 mm and 6.35 mm for use in making electrical connections in the internal wiring and to components of electrical equipment in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to quick-connect terminals designed for use with…

1. Scope 1.1 This Standard applies to cord-connected and permanently connected electrically heated commercial cooking appliances for use on nominal system voltages of 600 V and less, designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to electric ranges, ovens, broilers, fry kettles, griddles, sandwich toasters, toasters,…

1. Scope 1.1 This Standard applies to mechanical flue-gas exhausters intended to be installed in a flue pipe, breeching, or chimney and serving appliances burning natural gas, propane, or fuel oil. 1.2 This Standard covers the mechanical and electrical features of mechanical flue-gas exhausters for indoor or outdoor installations. 1.3 This Standard classifies mechanical flue-gas…

1. Scope 1.1 This Standard applies to the provision of alternative combustion heads or end-cones intended to be fitted to currently in-service residential gun-type burners for the purpose of improving combustion efficiency. 1.2 This Standard also applies to the provision of complete residential gun-type burners intended for the purpose of improving combustion efficiency.

1. Scope 1.1 This Standard applies to the continuous measurement of ozone in air. 1.2 This Standard sets forth the chemiluminescence method for the measurement of concentrations of ozone between 2 µg·m-3 and 10 mg·m-3 at 25°C and 101.3 kPa (approximately 0.001 ppm v/v and 5 ppm v/v). Notes: (1) All concentrations referred to throughout this Standard are based on a temperature…

Specifies three methods for determination - method A: on a straightened fibre on a graduated rule, under a light tension applied with the aid of forceps and grease; - method B: measurement, using an opisometer, of the length of the image of fibre enlarged by projection on a screen; - method C: by use of a semi-mechanical device. - Intended to replace two existing International Standard, ISO 270…