Rechercher

1. Scope 1.1 This Standard applies to cord-connected and permanently connected fans and ventilators intended to be connected to supply circuits of 600 V and less, for use in accordance with the Rules of the Canadian Electrical Code, Part 1. 1.2 This Standard applies to fans and ventilators for ventilating or exaust purposes and filter units consisting of an air circulating fan and a…

Applies to lead-acid batteries used for starting, lighting and ignition of passenger automobiles and light commercial vehicles with a nominal voltage of 12 V fastened to the vehicles by means of ledges on the long sides of the battery case, two alternative admissible means are specified in Section Three. Specifies: -the main dimensions of starter batteries of four standard series; -the location…

1. OBJECt The object of this standard is to determine the requirements regarding the characteristics and testing methods of plastic or reinforced plastic containers used for the transportation and storage of fishery products. 2. SCOPE OF APPLICATIOn This standard applies to the following plastic or reinforced plastic containers, according to their nominal capacity measured in litres…

This Series of standards applies to common types of plumbing fixtures such as bathtubs, sinks, W.C.'s, etc., but does not apply to appliances such as clothes washers or W.C.'s used in recreational vehicles. The standards include dimensional requirements, performance requirements and tests, and marking requirements and apply to plumbing fixtures made of vitreous china, enamelled…

Lays down the appropriate rules applying to standardized lifts of class I and permitting the number of lifts and their main characteristics to be defined at the very beginning of building design. Three quality levels are specified for the lift service. Part 1 covers the lifts of classes I, II and III, part 2 the lifts of class IV, part 3 service lifts of class V and part 5 control devices,…

1. Scope 1.1 This Standard applies to rigid unplasticized poly(vinyl chloride) conduit, elbows, bends, and couplings intended for use at a continuous operating temperature of 75°C for the installation of wires and cables in accordance with the Rules of the Canadian Electrical Code, Part I, for nonhazardous locations. Note: See Canadian Electrical Code, Rule 12-1204. 1.2 The products…

Scope 1.1 This standard applies to a sheet applied elastomeric membrane for use in roofing and waterproofing. 1.2 For further information regarding intended uses, see par. 8.2.

Covers minimum requirements for the installation of, alteration to, addition to and provision for maintenance for solid-fuel burning appliances and equipment intended to supply heat to air or water. It does not apply to the installation of incinerators, site-built fireplaces or process equipment. For the purpose of this Standard, solid-fuel burning appliances shall include furnaces, boilers,…

Gives a series of bucket capacities as a basis for standardization of inland dredger details. This series applies to multi-bucket dredgers used for dredging rivers, canals, lakes, water storage basins, water areas of ports and terminals.

1. Scope 1.1 This Standard applies to nonmetallic conduit of rigid PVC, type EB1 for encasement in concrete or masonry and type DB2/ES2 for direct burial or encasement in concrete or masonry, and their associated fittings, in accordance with the Rules of the Canadian Electrical Code, Part I, for ordinary locations. 1.2 The conduits and associated fittings covered by this Standard are…