This standard applies to inherently buoyant cushions filled with foam or kapok,
and provided with loops and tie tapes so that they may be attached to the body
to provide flotation.
1. Scope
1.1
This Standard applies to devices designed for installation on road motor
vehicles to provide a daytime running light function where the
vehicle is not factory-equipped with a daytime running light
system.
Note: This Standard has been harmonized as far as practicable with the
applicable Canadian Motor Vehicle Safety Regulations.
1.2
This Standard covers the minimum…
Audiovisual, video and television equipment and systems. Part 20: Methods of measuring and reporting...
Applies to 16 mm motion picture film projectors for 16 mm films for general application. Defines characteristics affecting the performance of 16 mm projectors related to picture quality and to the quality of sound recorded on and reproduced from photographic and magnetic sound tracks. Specifies methods of measurement of those characteristics, and the conditions under which such measurements shall…
Tests for power cables with extruded insulation for rated voltages above 30 kV (Um = 36 kV) up to 15...
Specifies test requirements for power cables for fixed
installations with extruded insulation of the types listed in
Sub-clause 1.4 for rated voltages, U, above 30 kV (Um = 36 kV) up
to and including 150 kV (Um = 170 kV).
The requirements apply to cables for usual conditions of
installation and operation, but not to special cables, such as
submarine cables, for which modifications to the standard…
Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies
Applicable to any type of building material that, by its own
structural qualities or the manner in which it is applied, is
capable of supporting itself in position or may be supported in
the test furnace to a thickness comparable to its recommended
use.
Standard Method of Test for Surface Burning Characteristics of Flooring,
Floor Covering, and Misce...
1. SCOPE
1.1 This method is applicable to the finished surface or covering of a floor
extending to a maximum depth of 65 mm. It may also be applied to materials
that cannot conveniently be tested in a ceiling mounted configuration.
Thermoplastic and loose fill materials might be included in this category.
1.2 The primary purpose of the test is to determine the comparative burning…
Applies to plumbing fixtures made primarily of vitreous and
nonvitreous ceramic material. The Standard covers physical
requirements and test methods pertaining to material, grading,
dimensions, and certain features of construction. Also given
are definitions, inspection methods and tests which establish
generally acceptable quality products.
Material Standards for Reactor Components for CANDU Nuclear Power Plants
1. Scope
N285.6.1
1.1 This Standard covers the requirements for the fabrication and properties of seamless zirconium alloy tubing suitable for use as the in-core portions of fuel channels of a CANDU reactor.
N285.6.2
1.1 This Standard covers the requirements for the fabric ation and properties of seamless zirconium alloy tubing to be used in reactivity control rods. Generally,…
