Electrode Receptacles, Fittings, and Connectors for Gas Tubes
1. Scope
This Standard applies to (a) electrode receptacles and fittings for mounting gas tubes intended for indoor and outdoor applications operating at voltages of 15 000 V and less but not exceeding 7 500 V to ground for use in accordance with the rules of the Canadian Electrical Code, Part I; (b) connectors that are intended to enclose the ends of gas tube electrodes and to provide a…
Road vehicles — Fuel injection pump testing — Part 3: Application and test procedures
This part is a document for use in the workshop. It forms the complement to the injection pump test schedules and coordinates the detailed technical requirements of parts 1 and 2 and further referenced standards with the procedural instructions necessary to apply and validate this standard as a whole.
Specification of minimum requirements for the installation, construction, function, documentation and testing of these systems to ensure patient safety. The requirements are included which relate to the source of supply, distribution system, terminal units, warning systems and non- interchangeability between key components and service outlets. The standard applies only for the medical gases…
Floor tiles of agglomerated cork — Characteristics, sampling and packing
This standard applies to tiles without surface covering. Gives the maximum permissible deviations in characteristics measured and determined in accordance with ISO 3810. Clauses 4 and 5 of the first edition have been technically revised.
1. Scope
1.1 This Standard applies to fixed equipment or accessories, or both, that utilizes signals to measure or control directly or indirectly an industrial process through a final control device (or devices) and is intended to be connected to supply circuits with voltages of 750 V and less, for use indoors or outdoors in nonhazardous locations in accordance with the Canadian Electrical…
Refrigerant-Containing Components for Use in Electrical Equipment
1. Scope
1.1 This Standard applies to refrigerant-containing components intended to be used in field installed systems in accordance with CSA Standard B52, Mechanical Refrigeration Code, charged with the refrigerant identified for use in the components.
1.2 This Standard applies to components intended for use in factory ass embled refrigeration or air-conditioning equipment, in which…
Applies to roof covering materials and are intended to measure
the relative fire-performance characteristics of roof coverings
when exposed to fire originating from sources outside a building
on which they may be installed. They are applicable to roof
coverings intended for installation on either combustible or
noncombustible decks when applied as intended for use.
Standard for Flame Tests of Flame-Resistant Fabrics and Films
Applies to the performance in flame-exposure tests of
flame-resistant fabrics of natural, synthetic, or combinations of
natural and synthetic fibres, or plastic films intended for such
use as tents, awnings, draperies, or decorations. The flame
resistance of the fabric or film may be inherent in the material
used or may be the result of chemical treatment to retard
ignition and spread of…
Operations Quality Assurance for Nuclear Power Plants
1. Scope
1.1
This Standard contains the requirements for the quality assurance program
applicable to the operational phase of a nuclear power plant.
1.2
This Standard embodies the relevant quality assurance requirements of CSa
Standard N286.0 and is the governing Standard for operations quality assurance
activities in the event of any conflicting requirements.
1.3
This Standard is…
1. Scope
1.1 This Standard applies to the following grounding and bonding equipment designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I:
(a) ground clamps, bonding devices, grounding bushings, water- meter shunts, grounding electrodes, and the like used in a grounding system;
(b) equipment for making electrical connections between
(i) the…
