Rechercher

1. SCOPE 1.1 This method is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm. It may also be applied to materials that cannot conveniently be tested in a ceiling mounted configuration. Thermoplastic and loose fill materials might be included in this category. 1.2 The primary purpose of the test is to determine the comparative burning…

Applies to plumbing fixtures made primarily of vitreous and nonvitreous ceramic material. The Standard covers physical requirements and test methods pertaining to material, grading, dimensions, and certain features of construction. Also given are definitions, inspection methods and tests which establish generally acceptable quality products.

1. Scope N285.6.1 1.1 This Standard covers the requirements for the fabrication and properties of seamless zirconium alloy tubing suitable for use as the in-core portions of fuel channels of a CANDU reactor. N285.6.2 1.1 This Standard covers the requirements for the fabric ation and properties of seamless zirconium alloy tubing to be used in reactivity control rods. Generally,…

This standard applies to two types of belached or dyed polyester/cotton pillow cases. These products are not recommended for use in hospital operating rooms.

1.1 This standard applies to a corrosion removing compound, containing sodium hydroxide and sequestering agents, for immersion cleaning. 1.2 Intended Uses - The corrosion removing compound covered by this standard is meant for immersion cleaning only. It is used for removing rust and scale from iron and steel surfaces, with or without attendant paint, grease or other surface coatings,…

Applies to the reversible process achieved by the PCM encoder/decoder system that transforms two audio signals into one PCM signal for compatibility, with either 525 line/ 60 field or 625 line/50 field television system. Establishes the signal format for the PCM encoder decoder for reproducing audio signals in PCM form on a consumer video cassette system. Ensures standardized system operation…

Applies to non-perforated magnetic tape used for professional and domestic analogue sound recording and reproduction. Lists and defines the characteristics, methods of measurement and equipment necessary to determine the electrical properties of magnetic tapes. Will also enable users of magnetic tapes to compare the technical product data of different manufacturers, produced in accordance with…

1.1 Scope 1.1.1 This Standard applies to manual lever operated, pressure lubricated, straight way gas shut-off valves of metallic construction with weld and flanged and threaded ends. 1.1.2 This Standard applies to valves used in: (a) appliances and equipment where gas is to be used for fuel purposes and, (b) piping and tubing systems falling within the pressure limitations…

Covers the requirements for the fabrication and properties of seamless zirconium alloy tubing to be used in reactivity control rods. Generally, this Standard applies to tubing with a diameter to wall thickness ratio of less than 80:1.

1.1 Scope 1.1.1 This standard applies to newly produced manually operated shut-off valves for gas piping systems and constructed of entir ely new, unused parts and materials which: (a) are intended for use downstream of the distributors meter or regulator, for operation at a maximum pressure of 1/2 psig (3.4 kPa), (b) are capable of operation at ambient temperatures between 32°F (0°C) and…