1. Scope
1.1 This standard applies to latex type primer-sealer for use on interior
wall surfaces including plasterboard, dry plaster, concrete or
previously painted porous surfaces.
1.2 For more detailed information on intended uses see par. 7.2.
1.3 This standard may require the use of materials and/or equipment that
could be hazardous. This…
1. Scope and Objective
1.1 This Standard applies to wet-process porcelain and toughened glass suspension-type insulators used on ac overhead power lines with a nominal voltage greater than 1000 V and a frequency not greater than 100 Hz. This Standard applies to single insulator units only. This Standard does not apply to long rod insulators.
1.2 The objective of this Standard is…
Christmas Tree and Other Decorative Lighting Outfits
1. Scope
1.1 This Standard applies to Christmas tree and other decorative lighting outfits, intended for connection to circuits of 125 V or less between conductors by means of an attachment plug cap, and designed to be used in accordance with the rules of the Canadian Electrical Code, Part I.
1.2 This Standard applies to indoor or outdoor outfits for illuminating Christmas trees and…
Vapour Barrier, Jacket and Facing Material for Pipe, Duct and Equipment
Thermal Insulation
1.1
This standard applies to two types of vapour barrier jacket and facing material
comprised of aluminum foil, glass fibre scrim and paper laminated with
adhesive, for use in the temperature range of -20 to 65 degrees C over thermal
insulation for pipes, ducts and equipment.
1.2
For more detailed information on intended uses, see par. 8.2.
1. SCOPE
1.1 This standard applies to a mechanical roll felt, sheet felt, and apparel
and decorative roll felt. This felt is not intended for use in ammunition
components.
1.2 For further details on intended uses, see par. 8.2.
1.3 This standard may require the use of materials and/or equipment that could
be hazardous. This document does not purport to address all the safety aspects…
Tolerances for building — Methods of measurement of buildings and building products — Part 2: Positi...
Gives guidance on the position of measuring points to be used in the measurement of buildings and building products. The positions given apply for check and compliance measurement and for collecting accuracy data. Building products consisting of glass wool and similar soft materials are not the subject of this Standard.
Information processing systems — Open Systems Interconnection — LOTOS — A formal description techniq...
Defines the syntax and semantics of the Formal Description Technique LOTOS used for the formal description of distributed, concurrent information processing systems. LOTOS can be used to describe formally the service definitions and protocol specifications of the layers of Open Systems Interconnection (OSI) architecture described in ISO 7498, and related standards, and conformance tests for…
Information processing systems - Open Systems Interconnection - LOTOS - A formal description techniq...
Defines the syntax and semantics of the Formal Description Technique LOTOS used for the formal description of distributed, concurrent information processing systems. LOTOS can be used to describe formally the service definitions and protocol specifications of the layers of Open Systems Interconnection (OSI) architecture described in ISO 7498, and related standards, and conformance tests for…
1. Scope
1.1 This Standard applies to portable hand-held electrically heated tools for voltages of 250 V and less, designed to be used in ordinary (ie, nonhazardous) locations in domestic, commercial, or industrial applications in accordance with the Rules of the Canadian Electrical Code, Part I.
For convenience the shorter term tools is used herein, except as otherwise stated.
1.2 This…
Design and Installation of Ground and Water Source Heat Pump Systems
Applies to unitary liquid source heat pumps with a maximum
standard rated output of 250 kW using surface or ground water or
coupled to an earth or lake loop as a thermal source or sink,
with or without a supplementary heating source.