Rechercher

Applies to a.c. circuit-breakers within the scope of IEC 60056 (Clause 1). It provides the general rules for testing a.c. circuit-breakers, for making and breaking capacities over the range of test-duties described in Subclauses 6.102 to 6.111 of IEC 56, by synthetic methods. The purpose of this standard is to establish criteria for synthetic testing and for the proper evaluation of results. Such…

Gives required characteristics and additional information to be supplied to the purchaser by the vendor of these products and is intended to apply to international transfers of commercial propane and butane. Is neither intended nor expected to replace or encroach upon national standards of any country, since seach country is subjected to different regulations, codes, industry practice and market…

1.1 This standard applies to petroleum distillate fuel for naval use. 1.2 Intended Uses - Fuel described by this standard is intended for use in marine applications (naval) such as boilers, gas turbine power plants, and high and medium speed internal combustion engines of the compression-ignition type operating at an ambient temperature greater than -12 degrees C. Fuel to this standard…

1. Scope 1.1 This Standard applies to electric signs and displays for indoor or outdoor use, in nonhazardous locations, intended for installation in accordance with the Canadian Electrical Code, Part I, on branch circuits of not more than (a) 750 V between conductors and involving lamp voltages of not more than 15 000 V for stationary signs; and (b) 125 V between conductors and involving…

1. Scope 1.1 Areas 1.1.1 This Standard applies within (a) patient care areas of hospitals; and (b) areas or spaces outside of hospitals which are intended to be used to provide patient diagnosis, treatment, or care, involving intentional electrical contact of any kind between the patient and medical electrical equipment. 1.1.2 This Standard does not apply to veterinary facilities,…

Scope 1. General Requirements for Combustion Safety Controls and Solid-State Igniters for Gas- and Oil-Burning Equipment 1.1.1 This Standard applies to combustion safety controls and solid -state igniters for gas- and oil-burning equipment that are designed to be used in accordance with the Rules of Part I of the Canadian Electrical Code. 1.1.2 Refer to Clause 2 for additional…

1. Scope 1.1 This Standard applies to spas, hot tubs, and associated equipment intended to be permanently connected to supply circuits with voltages of 250 V and less (150 volts-to-ground), for use indoors or outdoors in nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 Clauses 1 to 6 apply to spas and hot tubs and Clauses 7 and 8 apply to…

1. Scope 1.1 This Standard applies to helmets intended to provide protection for the heads of cyclists and defines the areas of the head that are to be protected. It covers the basic performance requirements for shock absorption and strength of the retention system. Marking and label requirements are also included. 1.2 Detachable visors are not covered in this Standard.

1. Scope 1.1 These requirements apply to both cord-connected and permanently connected electric radiant heaters and infrared and ultraviolet lamp assemblies for warming food or for cosmetic or hygienic purposes in nonmedical applications and in nonhazardous locations using nominal system voltages of 250 V and less, in accordance with the Rules of the Canadian Electrical Code, Part I.…

Applies to probes and probe assemblies for use with electrical, electronic, and electromechanical measuring and testing equipment covered by CSA Standard C22.2 No.231.0.