Thermoplastic Pipe - Flexible Corrugated Tubing and Fittings for Soil Drainage
The purpose of this standard is to establish requirements for dimensions,
characteristics and test methods for tubing and fittings, made from
thermoplastic materials, that are intended for soil drainage.
This standard applies to flexible tubing with circular cross-section, either
perforated or not, having corrugations with parallel or helical thread, as well
as to fittings required for…
1. Scope 1.1
This Standard applies to the overhead contact system and traction power supply to the locomotive, using a single-phase alternating supply at 25 or 50 kV nominal voltage, 60 Hz.
1.2 This Standard has been written primarily for use in the development of conventional railway freight and passenger services. However, the use of the Standard is recommended for development of…
1. Scope
1.1 This Standard applies to metal (Category A), nonmetallic (Category B) cable trays, and associated fittings greater than 100 mm wide, for the support of cables and insulated conductors designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I.
Standard for Installation and Classification of Burglar Alarm Systems forFinancial and Commercial Pr...
1.1 These requirements apply to the installation of protective wiring and
devices connected to burglar alarm systems on financial and commercial
premises, safes and vaults. These requirements also include the classification
of extent of protection installed at individual locations.
1.2 Burglar alarm systems are classified as Central Station, Monitoring
Station, or Local, according to the…
General Requirements - Canadian Electrical Code, Part II
1. Scope and Object
1.1 Scope of this Standard
This Standard covers definitions, construction requirements, marking, and tests
of a general nature that are applicable to all or several of the individual
standards of Part II of this Code.
1.2 Scope of Individual Standards
Each individual Standard covers definitions, construction requirements,
marking, and tests for a single class or a…
Applies to 50 kg bags intended for packing of cereals, beans or peas for
export. The bags may be made of natural fibre or synthetic material. The
standard states requirements on construction, dimensions, closure, performance
and marking. It is primarily intended to be used in food aid contracts issued
on behalf of the Canadian International Development Agency (CIDA).
Pipes and fittings made of glass-reinforced thermosetting plastics (GRP) — Definitions of terms rela...
Defines nominal pressure (PN), maximum allowable pressure, and maximum service pressure when applied to components. States the range of PN ratings for use with components. Annex A forms an integral part of this standard.
Polyspecific Anti-Human Globulin Reagent for the Antiglobulin Test (Monoclonal
and/or Polyclonal)
1.1 Applies to polyspecific anti-human globulin reagent used for the detection
of human globulins attached to red blood cells. The reagent may contain
polyclonal or a mixture of polyclonal and/or monoclonal components.
1.2 For the purpose of this standard, see par. 7.1 and 7.2.
Burnishable, Detergent Resistant, Water Emulsion Floor Polish
1.1 Applies to a burnishable detergent-resistant water emulsion floor polish
suitable for general application on most non-wood and sealed wood floors. It
should not be used on unsealed wood, cork or magnesite floors.
1.2 The two types of polishes described in this standard are designed for use
with ultra high speed (U.H.S.) burnishing machines capable of operating at 1500
r/min or…
Installation Code for Solid-Fuel-Burning Appliances and Equipment
1. Scope
1.1
Except as stated in Clause 1.3, this Standard covers requirements for the
installation of, alteration to, addition to, and provisions for maintenance of
solid-fuel-burning appliances and equipment intended to supply heat to air or
water.
Note: Recommendations for the storage of solid fuel and of ash are included in
Appendix A.
1.2
For the purpose of this Standard, solid…