Rechercher

This National Standard of Canada is equivalent to International Standard ISO 4254-4:1990. This part of ISO 4254 specifies safety requirements for winches used on forestry machinery and agricultural machinery used in forestry. It applies only to skidding winches mounted on mobile forestry machinery, e.g. skidders and forwarders and on agricultural machinery used in forestry operations.…

This National Standard of Canada is equivalent to American National Standards Institute standard ANSI T1.408-1990. 1.1 General It establishes performance and technical criteria for interfacing and interconnecting the various functional groups shown in figure 1. Compliance with this standard is intended to ensure compatibility at the interface points /a and /b (figure 1) and should not…

Applies to leaded gasoline which is intended for use in certain critical heavy duty truck, farm and marine equipment that were designed to use lead to avoid premature engine failure. Gasoline specified in this standard may contain Methyl Tertiary Butyl Ether (MTBE).

Applies to four grades of gasoline to which no lead or phosphorous compounds have been added. They are intended for use in spark ignition engines under a wide range of climatic conditions. Gasoline specified in this standard may contain Methyl Tertiary Butyl Ether (MTBE).

This National Standard of Canada is equivalent to International Standard ISO 7498-2:1989. This part of ISO 7498: a) provides a general description of security services and related mechanisms, which may be provided by the Reference Model; and b) defines the positions within the Reference Model where the services and mechanisms may be provided. This part of ISO 7498 extends the…

1.1 Covers the design, fabrication, installation, inspection, testing, and safety aspects of the operation and maintenance of gas pipeline systems including gathering lines, transmission lines, compressor stations, metering and regulating stations, distribution lines, and service lines. 1 .2 The Scope of this Standard, as shown in Figure 1.1, includes the following: (a) gas storage…

This National Standard of Canada is based on International Standard ISO 302:1981. 1.1 The Kappa number test is used for evaluation of pulps with regard to the degree of delignification and bleachability. 1.2 The method can be applied to pulps produced in yields up to about 65% and giving Kappa numbers not higher than 100 on hardwood pulps, and not higher than 120 on softwood pulps (Note 1).…

1.1 This dimensional standard applies to ready-to-wear uniform dress tunics and jackets, single breasted, for men. It provides size designations, body and garment dimensions. 1.2 Five basic size categories are covered, as follows: 0, 5, 10, 15 and 20 cm drops. 1.3 Five height ranges are provided for each size category: Extra Short, Short, Regular, Tall and Extra Tall. 1.4 This standard…

1.1 This dimensional standard applies to dress shirts and uniform dress shirts for men. Three size categories are provided, covering the size range from 34/13½ to 47/18½ inclusive (par. 4.1). 1.2 This standard is primarily intended to serve the requirements of the Federal Government.

1 PURPOSE The purpose of this standard is to determine the requirements in respect of the dimensions, characteristics and test methods used for the inspection of kitchen cabinets and bathroom vanities. 2 SCOPE This standard applies to kitchen cabinets and bathroom vanities made of solid wood, compressed particles or other materials, manufactured on a modular basis or to…