Rechercher

1 Scope 1.1 This Standard applies to spas, hot tubs, cold tubs, and associated equipment intended for residential and commercial use indoors or outdoors in nonhazardous locations, installed in accordance with the Rules of the Canadian Electrical Code, Part I, and connected a) permanently to an electrical circuit of 250 V or less (i.e., a maximum of 150 volts-to-ground); or b) by a factory-…

1 Scope This clause of Part 1 is replaced by the following. This part of IEC 60335 deals with the safety of sealed (hermetic and semi-hermetic type) MOTORCOMPRESSORS, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to MOTOR-COMPRESSORS tested…

1 Scope This clause of Part 1 is replaced by the following. BATTERY-OPERATED APPLIANCES and other d.c. supplied appliances are within the scope of this standard. Dual supply appliances, either mains-supplied or battery-operated, are regarded as BATTERY-OPERATED APPLIANCES when operated in the battery mode. This International Standard deals with the safety of electric shavers, hair clippers…

1 Scope 1.1 Electrical equipment covered by this Standard 1.1.1 Application This Standard applies to the electrical equipment for a) elevators covered by ASME A17.1/CSA B44 and ASME A17.8/CSA B44.8; b) escalators; c) moving walks; d) dumbwaiters; e) material lifts; f) manlifts; and g) platform lifts and stair lifts for barrier-free access (see CSA B355), and platform lifts and stairway…

1 Scope 1.1 This Standard applies to nonmetallic or composite mechanical protection tubing (MPT), and nonmetallic, composite or metal fittings, and clamps used for the support, routing and mechanical protection of conductors, wires, and cables. The MPT, fittings, and clamps are intended to be used to interconnect separate component assemblies or consoles of electrical devices, such as…

IEC 62841-2-4:2014+AMD1:2025 CSV applies to hand-held sanders and polishers with the exception of disc-type tools covered by IEC 62841-2-3. Tools covered by this standard include but are not limited to belt sanders, drum sanders or polishers, reciprocating sanders or polishers, orbital sanders or polishers and random orbit sanders or polishers. The rated voltage is not more than 250 V for single-…

IEC 62841-2-17:2017+AMD1:2025 CSV applies to routers intended for cutting slots into or shaping the edge of various materials. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals…

IEC 62841-2-14:2015+AMD1:2025 CSV applies to hand-held planners the rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all…

This document specifies the preamble message generated by the reader and interpretable by the receiving system, which indicates the bar code symbology or other origin of transmitted data, together with details of certain specified optional processing features associated with the data message. This document applies to automatic identification device communication conventions and standardizes the…

This document specifies the preamble message generated by the reader and interpretable by the receiving system, which indicates the bar code symbology or other origin of transmitted data, together with details of certain specified optional processing features associated with the data message. This document applies to automatic identification device communication conventions and standardizes the…