Rechercher

1.1 These requirements cover intrusion detection units for burglary protection signalling systems to be employed in outdoor or ordinary indoor (non-hazardous) locations to automatically indicate the presence of an intruder by actuating electrical control circuits. 1.2 An intrusion detector as covered by these requirements consists of one or more unit assemblies of electrical components which…

This document serves to complement the basic standards for safety signs: the ISO 3864 series, ISO 7010, ISO 16069, ISO 23601 and ISO 17398, as well as ISO 45001. This document contains recommendations and explanations on the practical application of safety signs to form a system of communication intended to reduce risk.

This document provides specification on the ITS-Station (ITS-S) access layer for a communication interface (CI) named "ITS-LTE-D2D". This specification is appropriate in the context of LTE-D2D communications that are being used for the dissemination of ITS information from an ITS-SU to other ITS-SUs, where these ITS-SUs can be either vehicle ITS-SUs, roadside ITS-SUs, or personal ITS-…

This document specifies methods of determining the stage?discharge relationship for gauging stations. It specifies an accuracy for defining the stage?discharge relationship based on a sufficient number of discharge measurements, complete with corresponding stage measurements. This document considers stable and unstable channels and includes brief descriptions of the effects on the stage?discharge…

1 Scope 1.1 This Standard specifies the minimum certification requirements for facilities engaged in the manufacture of metal-plate-connected wood trusses designed in accordance with CSA O86 and TPIC in order to conform with industry standards. 1.2 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the…

1 Scope 1.1 General 1.1.1 Application This Standard provides guidelines for the commissioning of energy and water systems in existing buildings, as defined in Part 3 of the National Building Code of Canada (NBC). This Standard addresses the special requirements for verifying energy and water performance during the commissioning of existing buildings. The commissioning of new systems in…

1 Scope 1.1 General This Standard specifies requirements for post-secondary institutions for the development and implementation of a framework to safeguard, promote, and continually improve the mental health and well-being of students. This Standard provides a foundation for a socio-ecological framework for the development, implementation, and continuous improvement of policies, programs,…

1 Scope 1.1 This Standard applies to indoor or outdoor meter-mounting devices, and combination meter-mounting devices. These devices can be single position or multiple positions, either as complete self-contained devices or provided as part of service equipment for use in nonhazardous locations, and are intended to be used in accordance with CSA C22.1, Canadian Electrical Code, Part I (“CE Code…

1 Scope 1.1 This Standard specifies requirements for single- and multi-conductor insulated cables having metallic interlocked armour without an overall jacket (Type AC90 or ACG90) or with an overall jacket (Type ACWU90 or ACGWU90) that are intended for installation in accordance with CSA C22.1, Canadian Electrical Code, Part I, on systems having nominal voltages of 2000 V and less. ACG90 and…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for hand-held multimeters for domestic and professional use, capable of measuring MAINS. Hand-held multimeters are multi-range multifunction measuring instruments intended to measure…