Toroidal strip-wound cores made of magnetically soft material
Covers the dimensional and constructional characteristics for toroidal cores wound from strips of magnetically soft steel or alloy having thickness between 0.003 mm and 0.35 mm. Includes standard ranges of main dimensions and recommendations for strip thickness, core protection, marking and packing.
Primarily intended for the manufacturer. Not applicable to generators with pulsed sinusoidal outputs, television pattern generators, complex function generators, and generators for insulation resistance testing. Lays down a standard list of performance characteristics to be used for describing the performance of pulse generators. Defines which characteristics should be specified and standard test…
Analogue signals for process control systems. Part 2: Direct voltage signals
Applicable to analogue direct voltage signals used in industrial process measurement and control systems. lt specifies ranges of analogue direct voltage signals and the signal common; it also deals with ripple content. The analogue direct voltage signal, unlike the analogue direct current signal specified in IEC 60381-1, is not intended for transmission over long distances. This standard does not…
This standard states the minimum requirements for the preparation of materiel
for shipment by contractors and/or suppliers, for delivery to supply
distribution warehouses or supply centers for storage and subsequent issue, or
for direct delivery to customers when specified (par. 8.1).
Application of Hot Asphalt for Dampproofing or Waterproofing
Scope
1.1 This standard describes the procedures recommended for application of hot asphalt covered by CSA A123.7, when used in dampproofing or waterproofing footings, floors, walls and structural slabs.
Pitch, Emulsified Coal Tar, Mineral Colloid Type, Filled, for Coating
Bituminous Pavements
Scope
1.1 This standard applies to a filled mineral colloid type of coal tar pitch emulsion for use as a solvent-resistant coating applied by brush, spray or squeegee to bituminous pavements.
1.2 See par. 7.2 for the intended uses of this emulsion.
Application of Coal Tar Pitch Emulsion, as a Bituminous Pavement Coating
Scope
1.1 This standard describes the procedure recommended for application of the coal tar pitch emulsion covered by CGSB 37-GP-39M, as a solvent resistant coating for bituminous pavements.
1. Scope
1.1 This Standard covers portable fuel tanks with a rated capacity of not more than 30 L (7 Canadian gallons), designed to be connected to gasoline-fuelled engines aboard boats by flexible fuel lines which may be disconnected for refilling and portability.
1.2 This Standard applies to fuel tank and fuel line assemblies and components to the point of connection at the engine,…
