1. SCOPE
1.1 This standard applies to inorganic zinc coating for use on steel
superstructures, decks and hulls of vessels, bridges, towers, off-shore
drilling rigs, tank linings and reconditioned equipment.
1.2 For detailed information on the intended uses of this coating see par.
8.2.
This Standard applies to two types of gasoline to which no lead
or phosphorus have been added and are therefore suitable for use
under all climatic conditions in spark ignition engines equipped
with emission control systems requiring the use of unleaded
gasoline. In the interest of conservation of petroleum products
it is essential that engine manufacturers continue to design
engines to…
Shirts, Sport, Woven or Tricot Knit, Boys' - Dimensions
1. SCOPE
1.1 This standard applies to the dimensions considered essential to provide
fit of sport shirts made from woven or tricot knit fabrics, intended for wear
by boys.
Soya bean products — Determination of cresol red index
The method permits an assesment of the degree to which products derived from soya beans have been cooked. It consists in mixing of a ground test portion with a standard cresol red solution, followed by spectrophotometric determination of the residual colouring material in the solution aftzer a specified time by comparison with the initial cresol red solution.
Essential oils — Determination of residue from distillation under reduced pressure
A test portion of the essential oil is slowly and under a reduced pressure of 660 Pa distilled until the temperature indicated in the standard for the essential oil is attained and the residue is weighed.
Defines the size and location of the image area common to both
Canadian P4 and ISO A4 sizes of paper. This common image area is
intended to facilitate the design and exchange of documents. It
permits the alignment of trade documents or of other documents,
and allows the material contained within the image area to be
reproduced from either size of paper onto the other without loss
of essential…
Abrasive products — Diamond or cubic boron nitride grinding wheels and saws — General survey, design...
Gives a general survey of standardized grinding wheels and saws the sizes of which are the subject of ISO 6168 and ISO 6105 respectively. Contains a code of designation for grinding wheel and saw forms. Specified in addition to terms in English, French and Russian the equivalent terms in German, Italian, Dutch and Swedish.
