Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness
Defines covered rollers as cylindrical cores, generally of metal, with a cover of rubber or plastics for particular use. They are manufactured in a wide variety of sizes and hardness grades depending on the intended use. - Part 2 and 3 of this standard deal with surface characteristics and dimensional tolerances.
Supplement No.3-1982 to CSA Standard CAN3-S6-M78, Design of Highway Bridge
Applies to the design of ordinary highway bridges that have spans
up to 100 m and other bridges to carry pedestrian, cyclist or
equestrial traffic. It deals with the general features of
highway bridges and loads and forces applicable to their design
considering different materials such as steel, concrete, timber
and composite structures. It gives design consideration for
substructures,…
1. Scope
1.1 This Standard applies to electrical aids intended to be used by physically disabled persons to facilitate their ability to communicate with others, alter the state of their environment, and to position themselves.
1.2 This Standard includes requirements relating to the safety of these aids and documentation on them, as well as recommendations of special interest to developers…
Prosthetics and Orthotics - Terminology, Definitions, and Identification
1. Scope
1.1 This Standard documents some of the technical terminology used in the field of prosthetics and orthotics, and provides a definition for each of these terms. Note: This Standard is not intended to cover all technical terminology used in the field of prosthetics and orthotics. It is anticipated that, by way of revisions to this Standard, terms will be added from time to time as…
Aircraft — Ground support electrical supplies — General requirements
Gives electrical output characteristics, and interface requirements, between an aircraft and ground support electrical supplies. Requirements for safety features are also included. The facilities covered by this International Standard are intended to supply power to an aircraft. In some cases the facility may also be capable of being used for aircraft engine starting.
Specifies performance and construction requirements for systems
intended to collect and dispose of waste anaesthetic gases and
vapours released from equipment used in administering such
anaesthetics or exhaled by a patient connected to such equipment.
The main aim of this document is to ensure that these systems are
effective in their intended purpose, yet pose minimal risk to the
patient.…
Requirements for Monitoring and Display of CANDU Nuclear Power Plant Status
in the Event of an Acc...
1. Scope
1.1 At the onset of an accident, certain protective actions (e.g., reactor trip, emergency core cooling actuation, containment isolation) are designed to be performed automatically. Specific CSA Standards cover the systems that perform these actions. ,, However, the operator has an increasing role to play as time progresses in managing the outcome of the event. Instrumentation is…
1. Scope
1.1 This Standard specifies the mechanical and electrical characteristics of three-phase network transformers having rated primary voltages up to 34.5 kV and kV.A ratings of 500-2500.
