Rechercher

This International Standard specifies the recorded characteristic for magnetic Sound records on 35 mm motion-picture film excluding striped release prints when used at the nominal Speed of 24 frames (45,6 cm or 18 in) per second or 25 frames (47,5 cm or 18.7 in) per second. NOTE - This International Standard and relevant portions of Recommendation No. 265-2 of the CCIR have substantially the same…

Specifies a method for the determination of compressive creep of rigid cellular plastics under specified conditions of load, temperature and time. Test specimes in form or rectangular parallelepipeds are placed between two flat plates and the specified load is applied a) at standard conditions and b) at agreed conditions of temperture and time. The difference in compressive deformation of the…

Adhesion is obtained by a bonding system which may include not only the rigid material and the rubber compound, but other elements, e.g. thin alloy coatings etc. The bonding system should be adequately specified by the user, but the standard provides for evaluation of differnt types of failure related to a complex adhesion system. The standard test piece is given in a figure, the test report is…

This National Standard of Canada is identical to American National Standard ANSI/BHMA A156.2-1983 in total, without any modification. It establishes requirements for bored and preassembled locks and latches and includes performance tests, strength tests, operational tests, finish tests and dimensional criteria.

1. Scope 1.1 General 1.1.1 This Standard applies to the continuous measurement of the concentrations of (a) oxygen (O2) (see Clause 6.1); (b) carbon dioxide (CO2) (see Clause 6.2); (c) carbon monoxide (CO), (see Clause 6.3); (d) sulphur dioxide (SO2) (see Clause 6.4); and (e) nitrogen oxides (NOx); in a continuously extracted sample of combustion gases from an enclosed gas…

1. Scope 1.1 General This Standard applies to (a) reagents and apparatus for preparing dialysing fluid; (b) monitors of the dialysing fluid; (c) accessories for monitoring the extracorporeal blood circuit; and (d) blood pumps, infusion, and single needle systems. Notes: (1) Examples of reagents and devices included within the Scope of this Standard are dialysis concentrate and…

1. Scope 1.1 This Standard prescribes a method for determining heat outputs, appliance efficiencies, emission levels and composition, and flue gas flow rates for wood-fired appliances with a closed fire chamber. 1.2 For the purpose of this Standard, a wood-fired appliance with a closed fire chamber is one in which the air-fuel ratio is less than 30:1 by weight during the burning of at…

1. Scope 1.1 This Standard applies to stationary electric duct heaters for comfort heating rated at 600 V or less and 1000 kW and less, designed to be installed and used in nonhazardous locations in residential, commercial, and industrial applications, in ac cordance with the Canadian Electrical Code, Part I. Note: The Canadian Electrical Code, Part I, provides a limitation of 150 V to…

1. Scope 1.1 This Standard applies to insulating tubing that consists entirely of extruded compounds (see Table 1 for materials, sizes, and ratings) and also applies to heat-shrinkable tubing (with or without a meltable liner) intended for use in equipment designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I, at a voltage not exceeding 1000 V. 1.2…