Rechercher

Specifies series with metric dimensions and thread sizes from M 12 up to and including M 36 for use with bolts of prperty classes 8.8 and 10.9; tabulates specifications and reference standards, proof load values, thread dimensions for hot dip galvanized nuts, and for testing nut rotation requirements.

This International Standard specifies the recorded characteristic for magnetic sound records on 16 mm full-coat perforated magnetic film when used at the nominal speed of 24 frames [18,3 cm (7.2 in)] per second, or 25 frames [19,05 cm (7.5 in)1 per second.

This International Standard specifies the dimensions and location of the cartridge aperture, pressure pad, and characteristics necessary for the appropriate flatness of the cartridge and location of film in the camera aperture, for any model of 8 mm Type S Model I motion-picture film camera cartridge [sound or silent, 15 m (50 ft) or 60 m (200 ft)].

Applies to deep sea ships and inland navigation ships. Specifies the major dimensions of strum boxes installed at the end of bilge suction pipes to prevent pipe obstruction by solid matter. Strum boxes complying with this International Standard are not acceptable for bilge suction pipes in machinery spaces and shaft tunnels.

Specifies series with metric dimensions and thread sizes form M 12 up to and including M 36 for use with nuts according to ISO 4775; tabulates general dimensions, specifications and reference standards, screw thread limits for tolerance class 6az, and for testing nut rotation requirements.

Specifies series with metric dimensions and thread sizes form M 12 up to and including M 36 for use with nuts according to ISO 4775; tabulates general dimensions, specifications and reference standards, screw thread limits for tolerance class 6az, and for testing nut rotation requirements.

Specifies series with metric dimensions and thread sizes from M12 up to including M 36; tabulates general dimensions, specifications and reference standards, proof load values, screw thread limits for tolerance class 6AZ, and for testing nut rotation requirements; gives an example for the designation.

Specifies products intended for assembly with large series hexgon bolts and nuts of diameters from M 12 up to and including M 36; includes specifications with reference to International Standards; gives an example for the designation.

Specifies series with metric dimensions and thread sizes from M 10 up to and including M 16; tabulates general dimensions, specifications and reference standards, proof load stresses and screw thread limits for tolerance class 6 AX; gives an example for the designation.

1. Scope 1.1 This Standard applies to heater elements for use in equipment intended to be connected to a supply of nominal system voltage of 600 V or less, and to those elements that are installed in accordance with the Rules of the Canadian Ele ctrical Code, Part I. 1.2 This Standard applies to the following types: (a) open wire (including wire, ribbon, and expanded metal); (b)…