1. Scope
1.1 This Standard applies to structures and hoists that are not a permanent part of buildings, structures, or other works and that are used during construction, alteration, or demolition to raise and lower materials connected with or related to a building project.
1.2 This Standard covers the design, construction, installation, operation, and acceptance inspection and testing…
Certification of Companies for Fusion Welding of Aluminum
1. Scope
1.1 This Standard specifies requirements for certification of companies engaged in fusion welding of aluminum performed as part of the fabrication or erection of aluminum structures.
1.2 Requirements necessary to obtain and maintain certification include the qualification of welding procedures, the qualification of personnel, and an assessment of welding and auxiliary e…
Packaging — Complete, filled transport packages — Toppling test
This International Standard specifies a method for carrying out a toppling test on a complete, filled transport package which may be exposed to the danger of toppling during storage, transport and handling. The test may be used to assess the performance of a package in terms of its strength or the protection that it offers to its contents when it is subject to toppling. lt may be performed either…
Applies to new voltage transformers for use with electrical
measuring instruments and electrical protective devices at
frequencies from 15 Hz to 100 Hz.
The general requirements apply to all voltage transformers, but,
for certain types, e.g. capacitor voltage transformers, the
requirements are subject to the modifications stated in the
appropriate chapter. Although the requirements relate…
Medical electrical equipment. Part 2: Particular requirements for the safety of gamma beam therapy e...
Specifies requirements for the safety, design and construction of
gamma beam equipments when used for radiotherapy in human medical
practice.
Applies to equipment which is intended to deliver a gamma radiation
beam(s) at normal treatment distances greater than 5 cm using a
sealed radioactive source(s).
It is the purpose of the requirements contained in this standard to
ensure that the proposed…
Amendment 1 - Standardization of interconnections between broadcasting transmitters or transmitter s...
Gives Clause 11, Photocoupler techniques and Section 4, Standard interface techniques (analogue), which were 'under consideration' in the main publication.
1.1
This standard applies to cloth type, water-resistant, pressure-sensitive
adhesive tape intended primarily for packaging and sealing application where
high strength and low moisture vapour transmission are required.
1.2
For more detailed information on intended uses and application see par. 7.2.
Corrosion tests in artificial atmosphere — General requirements
Specifies specimens, apparatus and procedure of corrosion tests. Applies to metals and alloys with and without permanent corrosion protection or temporary corrosion protection. The requirements specified in ISO 7384 are intended for application in other International Standards dealing with corrosion tests in artificial atmospheres as well as in accelerated methods of test and the construction of…
