Rechercher

This National Standard of Canada is equivalent to International Standard ISo 9000:1987. The purposes of this International Standard are (a) to clarify the distinctions and interrelationships among the principal quality concepts (see clause 4), and (b) to provide guidelines for the selection and use of a series of International Standards on quality systems that can be used for…

1. Scope 1.1 This Standard covers the following: (a) plastic drain and sewer pipe and plastic pipe fittings in the size range NPS-2 through NPS-6 with pipe stiffness of 275, 320, or 625 kPa, including both single-wall and co-extruded dual-wall pipe with a smooth interior; (b) single-wall, noncorrugated, perforated plastic pipe and plastic pipe fittings; (c) co-extruded dual-wall…

This National Standard of Canada is equivalent to American National Standards Institute (ANSI) standard T1.403-1989. This standard describes the metallic interface between a carrier and customer installation (CI), referred to as the network interface (NI), at the DS1 rate. It establishes requirements at the NI necessary for compatible operation between the carrier and the CI. Interfaces…

1.1 This Standard defines the alphanumeric lexical sequence for the English and French languages. It is intended for general-purpose sorting of all alphanumeric strings using the character repertoire of CSA Standard CAN/CSA-Z243.4 in Canada, wherever human intervention is involved or sorted results are presented to users. 1.2 Sorting is based on the rules of word ordering rather than on…

1.1 This test method determines the degree of combustibility of building materials by measuring the rate of heat release from specimens exposed to radiant heat using the test apparatus, specimen configurations, and procedures described. 1.2 This test method provides for radiant thermal exposure of a specimen together with application of a pilot flame on the specimen. 1.3 Heat release…

This National Standard of Canada is based on draft ASTM Standard D3826. 1. Scope 1.1 This Standard outlines a method for determining the effect of exposure to a simulated soil on the properties of plastics in the form of moulded and/or fabricated articles, tubes, rods, sheets, and film. Changes in visual, chemical, and mechanical properties may be determined by the applicable method (…

This National Standard of Canada is equivalent to International Standard ISO/IEC 8571-5:1990. 1 Scope This part of ISO 8571 defines a Protocol Implementation Conformance Statement (PICS) proforma for the detailed expr ession of the conformance requirements of ISO 8571. This PICS proforma is in compliance with the relevant requirements and in accordance with the relevant guidance for a PICS…

This National Standard of Canada is based on International Standard ISO 3450:1985. This International Standard specifies minimum performances and test criteria for braking systems to enable uniform assessment of the braking capability of earth-moving machinery which operates on work sites or travels on public roads. Service, secondary and parking braking systems and retarders are covered…

1.1 Applies to the materials, construction, and testing of one- to four-conductor shielded and single-conductor concentric neutral cables incorporating cross-linked polyethylene or ethylene-propylene rubber insulation with optional thermoplastic or thermoset jacket and optional metal sheath or armour. These cables are intended for transmission and distribution of electrical energy for use…

Deals with the qualification, application, inspection, testing, handling, and storage of materials required for plant-applied fusion bond epoxy coating applied externally to bare steel pipe. The coated pipe is primarily intended for buried or submerged service for oil or gas pipeline systems. Note: It is not intended that the application of this Standard should prevent the development of…