This standard specifies physical and chemical requirements for a solvent-type
paste wax for application on linoleum, vinyl or wooden floors. It is not
suitable for use on asphalt or rubber floors.
1.1 This standard states physical and chemical requirements for a built sodium
soap in powder form, suitable for commercial and institutional laundering.
1.2 The soap is intended for use in soft water (calcium cabonate hardness up
to 120 mg/L). In locations where water hardness exceeds 120 mg/L (as calcium
carbonate), an appropriate synthetic detergent composition would be more…
1.1 This standard states physical, chemical and performance requirements for a
special purpose non-ammoniated liquid detergent compound for use in the removal
of water-emulsion floor polish and wax.
1.2 For more detailed information on intended uses, see par. 7.2.
This standard applies to a diethyltoluamide type insect repellent, intended for
direct application to exposed skin surfaces and, under certain conditions, to
clothing. It is intended for protection against mosquitoes, black flies, sand
flies, gnats, ticks and chiggers (mites).
This standard applies to methyl ethyl ketone for use as a solvent for paints,
strippable coatings, adhesives and for removal of petroleum type preservatives.
1.1 This standard applies to coarse and fine sodium chloride intended for use
in melting ice and snow on pavement.
1.2 See par. 8.2 for further information on intended uses.
Mineral Fibre Thermal Insulation for Piping and Round Ducting
This standard applies to three types and five classes of jacketed and
unjacketed mineral fibre products suitable for use as thermal insulation on
piping and round ducting with surface temperatures up to 875 degrees C.
Products to this standard may include a surface covering that forms an integral
part of the insulation.
