Rechercher

This International Standard specifies manufacturing methods and materials that will result in durable hard cover and soft cover binding for books manufactured in commercial quantities. It does not apply to hand bookbinding, individual casing or binding of archival matter. Nor does it apply to fine binding which does not serve its normal purpose of primarily protecting a book block (such as…

Introduction The Fuel Safety Handbook is intended to provide the basic information which is essential to gas technicians working with natural gas and propane fuel gases in Ontario. The Fuel Safety Handbook is intended to address the knowledge needed by Ontario gas technicians seeking to fulfill the requirements of the new Training and Certification Regulation (348/96) under the Energy Act,…

1. Scope Z245.20 1.1 This Standard applies to the qualification, application, inspection, testing, handling, and storage of materials required for plant-applied fusion bond epoxy coating applied externally to bare steel pipe. The coated pipe is primarily in tended for buried or submerged service for oil or gas pipeline systems. Z245.21 1.1 This Standard applies to the…

1. Scope 1.1 This Standard applies to the qualification, application, inspection, testing, handling, and storage of materials required for plant-applied fusion bond epoxy coating applied externally to bare steel pipe. The coated pipe is primarily intended for buried or submerged service for oil or gas pipeline systems.

1. Scope 1.1 This Standard applies to the qualification, application, inspection, testing, handling, and storage of materials required for plant-applied polyethylene coating applied externally to pipe, whereby an adhesive is interposed between a bare or epoxy primed pipe and the polyethylene. The coated pipe is primarily intended for buried or submerged service for oil or gas pipeline…

Specifies the general requirements for the insulation coordination of electromechanical non-specified time all-or-nothing relays; it is based on the basic safety standard for insulation coordination IEC 60664-1.

1. Scope 1.1 This Standard specifies requirements for the mechanical, electrical, and environmental performance of connectors designed for installation on the bare surface of overhead line conductors. Note: Although the requirements of this Standard were developed primarily for connections to aluminum conductors, the requirements are also applicable to connectors for copper-to-copper or aluminum…

1. Scope 1.1 This Standard specifies the chassis and body requirements for school buses. 1.2 This standard applies to Types A1, A2, B, C, and D school buses. 1.3 This Standard does not cover after-market and retrofit installations. These installations are covered by federal and provincial regulations and it is the responsibility of the appropriate jurisdiction to inspect and…

This National Standard of Canada is equivalent to International Standard ISO 9000-2:1997. 1 Scope This part of ISO 9000 gives guidance on the application of the 1994 versions of ISO 9001, ISO 9002 and ISO 9003. It does not add to, or otherwise change, the requirements of ISO 9001, ISO 9002 or ISO 9003. In the case of conflicting interpretations of ISO 9001, ISO 9002 or ISO 9003 on…

1.1 SCOPE 1.1.1 This standard applies to newly produced vented gas-fired space heating appliances (see Part XIV, Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with manufactured gas; c. For use with mixed gas; d…