Rechercher

1. Scope 1.1 This Standard specifies (a) requirements for the performance testing of solidappliances having an air-fuel ratio averaging less than 35:1 as determined by Clause 16; and (b) maximum emission rates. 1.2 This Standard specifies a method for determining (a) heat outputs; (b) appliance efficiencies; (c) emission levels and composition; and (d) flue…

This National Standard of Canada is based on International Standard ISO 3411:1995 (third edition, 1995-12-15). 1. Scope This International Standard defines the dimensions of male operators of earth-moving machinery and specifies the minimum normal operating space envelope around the operator enclosures (cabs, ROPS, FOPS) generally applicable to earth-moving machinery. It applies to earth…

1. Scope 1.1 Purpose This Standard establishes the principles and practices that are applicable to a Phase II ESA. It is intended to provide a consistent framework and minimum requirements for conducting Phase II ESAa that can accomodate broader regulatory and liability requirements, as well as address pertinent site-specific requirements. This framework involves developing a sampling plan,…

1. Scope 1.1 This Standard is intended as a specification for the certification of products as suitable for installation as roadway noise barriers. 1.2 This Standard is also intended to specify the requirements for certification of the installation of individual barrier sites. 1.3 This Standard is also intended to specify the requirements for noise barrier design and materials.…

This National Standard of Canada is equivalent to International Standard ISO/TS 16949:1999 (first edition, 1999-03-01). 1. Scope This Technical Specification specifies, in conjunction with ISO 9001:1994, the quality system requirements for the design/development, production and, when relevant, installation and servicing of automotive-related products. This Technical Specification is…

1. Scope 1.1 This Standard sets forth methods for both new installation and replacement installation of factory-assembled windows and exterior doors that are intended for vertical installation in small buildings primarily used for residential occupancy. 1.2 This Standard provides minimum requirements that will help to ensure the installation of windows in an effective manner, such…

CAN/CSA-A5-98 Portland Cement 1. Scope 1.1 Scope This Standard addresses the definition of Portland cement; the chemical, physical, and uniformity requirements; the tests required; the procedures for inspection and sampling; the units of measurement, packaging, marking, and storage. 1.2 Types The five types of Portland cement covered in this Standard are identified as follows: Type…

1. Scope 1.1 General This Standard addresses the definition of blended hydraulic cement; its chemical and physical requirements; the tests required; the procedures for inspection and sampling; the units of measurement; and its packaging, marking, and storage. The intent of this Standard is to define the properties of the blended product; it does not include cases in which the…

La présente Norme nationale du Canada est équivalente à la Norme internationale ISO 11850:1996. 1 Domaine d'application La présente Norme internationale fixe des prescriptions générales de sécurité relatives aux machines forestières automotrices spécifiques définies dans l'ISo 6814:1983, article 4, ainsi qu'aux machines adaptées pour des applications forestières, lors…

This National Standard of Canada is equivalent to International Standard ISO 11850:1996. 1 Scope This International Standard specifies general safety requirements for specially designed self-propelled forestry machines defined in ISO 6814:1983, clause 4, and machines adapted for forestry applications when operating on work sites or transporting between sites.