Rechercher

This document specifies an atmospheric accelerated test procedure in two closely related variants that contain intermittent salt exposure combined with dynamic humidity patterns: variant A at constant dew point and variant B at constant temperature. These variants are used in assessing the corrosion resistance of metals in environments where there is a significant influence of chloride ions,…

This document defines a data format to exchange data that is relevant for exchanging and using measurement equipment between calibration service providers, laboratories and requestors in vehicle safety testing. Additional content found on https://standards.iso.org/iso/ts/23520/ed-1/en defines standard exchange for equipment grouping and metadata definitions for test documentation. Related…

This document specifies requirements for the integration of industrial robot applications and industrial robot cells. The following are addressed: —     the design, integration, commissioning, operation, maintenance, decommissioning and disposal; —     integration of machines and components; —     information for use for the design, integration, commissioning, operation, maintenance,…

1 Scope 1.1 Safety guidance for use of energy-based medical and surgical devices This Standard presents guidance to ensure the safety of persons at risk in locations where energy-based medical and surgical devices are used. This includes but is not limited to guidance on purchasing, education, training, installation, use, servicing, maintenance, engineering and administrative controls, and…

This document provides requirements and recommendations for supervisors and operators of point-of-care testing (POCT) services where POCT is performed without medical laboratory training, supervision or support. It includes the key components that should be considered to provide safe and reliable POCT results. Self-testing is excluded from this document.

This document specifies the dosimetric and organizational criteria and the test procedures to be used for the periodic verification of the performance of dosimetry services supplying personal and/or area, i.e. workplace and/or environmental, dosemeters used for individual (personal) and/or area, i.e. workplace and/or environmental monitoring. NOTE            The quality of a supplier of a…

1 Scope 1.1 Overview This Standard covers enamelled cast iron and enamelled steel plumbing fixtures, and specifies requirements for materials, construction, performance, testing, and markings. 1.2 Inclusions This Standard covers the following plumbing fixtures: a) bathtubs; b) drinking fountains and water coolers; c) lavatories; d) shower bases; and e) sinks: i) bar sinks; ii)…

Scope This document specifies requirements and good practice recommendations for the collection and transport of samples intended for medical laboratory examinations. This document is applicable to medical laboratories and service providers, which can be independent from the medical laboratory, involved in laboratory pre-examination processes that include the examination request, patient…

Scope This National Standard of Canada defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I controls (see Figure 1 for a schematic representation). This standard does not…

Objet La présente Norme nationale du Canada définit les exigences relatives à l’équipement, aux critères de rendement, à la procédure à suivre et aux méthodes d’essai pour la mise en place de systèmes de récupération des vapeurs (SRV) dans les réseaux de distribution d’essence comprenant des terminaux, des dépôts routiers, des stations-service et des camions-citernes qui sont couramment…