Rechercher

Scope This document specifies requirements and good practice recommendations for the collection and transport of samples intended for medical laboratory examinations. This document is applicable to medical laboratories and service providers, which can be independent from the medical laboratory, involved in laboratory pre-examination processes that include the examination request, patient…

This document specifies requirements and good practice recommendations for the collection and transport of samples intended for medical laboratory examinations. This document is applicable to medical laboratories and service providers, which can be independent from the medical laboratory, involved in laboratory pre-examination processes that include the examination request, patient preparation…

Applies only to electrically powered laboratory equipment for the heating of materials but excludes equipment for the heating and ventilation of laboratories and sterilizing equipment. Has the status of a group safety publication in accordance with IEC Guide 104.

ISO/ASTM 15400 describes the characterization and performance criteria to be met by a high-dose radiation dosimetry calibration laboratory. By meeting these criteria, the laboratory may be accredited by a recognized accreditation organization. Adherence to these criteria will ensure high standards of performance and instill confidence that the accredited laboratory is competent to provide…

ISO 24450:2005 specifies requirements and dimensions for an internationally acceptable series of conical flasks and of flat-bottom and round-bottom flasks with wide neck for general laboratory purpose. The flasks are provided for direct use in laboratory, fitting together with other equipment for general laboratory purposes, and for further work up to other products. For narrow-necked boiling…

This National Standard of Canada is based on International Standard ISO 7096:1994 (second edition, 1994-10-01). 1. Scope This International Standard specifies a laboratory method for vibration testing of operator seats for earth-moving machinery at frequencies between 1 Hz and 20 Hz. It is based on ISO 10326-1 which is a general method applicable to seats for different types of vehicles…

Preface This is the second edition of CSA PLUS 15189, The ISO 15189:2007 essentials - A practical handbook for implementing the ISO 15189:2007 Standard for medical laboratories. It supersedes the previous edition, published in 2004 under the title The ISO 15189:2003 essentials - A practical handbook for implementing the ISO 15189:2003 Standard for medical laboratories. Introduction…

ISO/TR 11371:2013 gives guidelines for the laboratory refining of various pulps intended for paper production including unifying terms and parameters for the simulation of industrial refining processes and laboratory refiners; treating pulp samples in a (semi) continuous operation in contrast to quasi-stationary laboratory beating equipment such as the PFI mill or Valley Hollander; evaluation of…

This Technical Report constitutes an attempt to explain the numerical results of a statistical examination in the simplest possible way and to show how statistical results can be used in laboratory practice. This simplified method is applicable when the number of laboratories is not more than 20 and when the number of results per laboratory is not more than 10.

ISO/TS 22367:2008 characterizes the application of ISO 15189 as a system for reducing laboratory error and improving patient safety by applying the principles of risk management, with reference to examination aspects, especially to pre- and post-examination aspects, of the cycle of laboratory medical care. ISO/TS 22367:2008 proposes a methodology for finding and characterizing medical laboratory…