Rechercher

Specifies laboratory aerodynamic testing and rating as well as test facilities and measurement techniques for air terminal devices. Gives only tests for the assessment of characteristics of the air terminal devices under isothermal conditions. A test method under non-isothermal conditions will be added when approved.

ISO 5264-2:2011 specifies a method for the laboratory beating of pulp using a PFI mill. The description is limited to the sampling, preparation and beating of the pulp and the beating equipment. In principle, this method is applicable to all kinds of chemical and semi-chemical pulps. In practice, the method might not give satisfactory results with certain pulps having extremely long fibres.

ISO 17099:2014 addresses the following: a) confidentiality of personal information for the customer and the laboratory; b) laboratory safety requirements; c) radiation sources, dose rates, and ranges used for establishing the calibration reference dose-effect curves allowing the dose estimation from CBMN assay yields and the minimum resolvable dose; d) performance of blood collection…

ISO 10140-5:2010 specifies laboratory test facilities and equipment for sound insulation measurements of building elements, such as components and materials, building elements, technical elements (small building elements) and sound insulation improvement systems.

Laboratory samples are taken from the containers in the consignment samples obtained as specified in ISO 6741-1 and placed in stoppered, air-tight vessels for subsequent processing. Sampling procedures for different forms of fibres and yarns are described.

ISO 20200:2015 specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.

ISO 20200:2004 specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.

This International Standard specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when used under the environmental conditions of 1.4. This document consolidates the requirements of four standards, IEC 61010-2-041, IEC 61010-2-042, IEC 61010-2-043 and…

ISO 22856:2008 establishes general principles for the measurement of spray drift potential in wind tunnels under controlled laboratory conditions. ISO 22856:2008 is applicable where comparative assessment or classification of the relative spray drift potential from spray generators (e.g. nozzles) or spray liquids is needed.

This document complements and supplements the procedures and general requirements found in ISO/IEC 17025:2017 for laboratories performing testing based on ISO/IEC 19790 and ISO/IEC 24759.