Rechercher

1 Scope 1.1 This Standard applies to all types of laboratory fume hoods, except for recirculating fume hoods. 1.2 This Standard specifies (a) safety requirements for fume hoods; (b) test methods for assessing fume hood performance; (c) requirements for the selection, use, and maintenance of fume hoods; (d) requirements for the education of fume hood users and maintenance personnel;…

1 Scope This document gives guidelines on the handling, documentation, storage and processing of formalin-fixed and paraffin-embedded (FFPE) tissue specimens intended for the examination of isolated proteins during the pre-examination phase before a molecular assay is performed. This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-020:2006. 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1 Scope Replacement: This Part 2 is applicable to electrically powered LABORATORY CENTRIFUGES. NOTE If all or part of the equipment falls within the scope of one or more other Part 2 standards of IEC 61010 as well as…

1 Scope 1.1 This Standard provides requirements and guidance to assist first responders and other agencies in selecting the appropriate level and type of personal protective equipment (PPE) when investigating and dismantling clandestine synthetic drug laboratories (CDLs) and marijuana grow operations (MGOs) so as to reduce personal risk in the execution of their responsibilities. 1.2 This…

1.1 Scope 1.1.1 Equipment included in scope [Add the following paragraph] This Standard covers equipment that is intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I. 1.1.2 Equipment excluded from scope [Replace the third dashed item with the following] – safety ACTUATORs and SOLENOIDs performing a safety function as covered by CSA C22.2 No. 139;

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text, except the first paragraph, with the following new text: This part of IEC 61010 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and stirring, where mechanical energy influences the shape or size or…

1.1.1 This Standard applies to packaged heat/energy-recovery ventilators (HRVs/ERVs) that consist of factory- assembled elements, including fans or blowers, in which heat or heat and moisture are transferred between two isolated airstreams. 1.1.2 This Standard specifies laboratory methods of test and procedures for rating the apparent effectiveness and heat-recovery efficiency of HRVs/ERVs.…

1 Scope This document defines methods for reducing combined samples (or increments) to laboratory samples and laboratory samples to sub-samples and general analysis samples and is applicable to solid biofuels. The methods defined in this document can be used for sample preparation, for example, when the samples are to be tested for calorific value, moisture content, ash content, bulk density…

This National Standard of Canada is equivalent to International Standard ISO 5007:1989. This Standard specifies a method for measuring and evaluating the effectiveness of the seat in reducing the vertical whole-body vibration transmitted to the operator of an agricultural tractor. Vibration which reaches the operator other than through his seat, for example that sensed by his feet on…

1 Scope This document specifies the methods to be used by testing laboratories to test whether the cryptographic module conforms to the requirements specified in ISO/IEC 19790:2012. The methods are developed to provide a high degree of objectivity during the testing process and to ensure consistency across the testing laboratories. This document also specifies the requirements for information…