Gas Water Heaters - Volume I, Storage Water Heaters With Input Ratings Below
75,000 Btu Per Hour or...
1.1 Scope
1.1.1 This standard applies to newly produced, automatic storage water heaters
having input ratings of 75,000 Btu per hour (21 980 W) or less (see Part IV,
Definitions), hereinafter referred to as water heaters or appliances,
constructed entirely of new, unused parts and materials:
a. For use with natural gas;
b. For use with manufactured gas;
c. For use with mixed…
Two-wheeled mopeds — Antilock braking systems (ABS) — Tests and measurement methods
This International Standard specifies tests and measurement methods for solo mopeds (defined in ISO 3833)
equipped with one or more antilock, and one or more independent, braking systems. Its purpose is to establish
uniform worldwide test procedures for such systems.
This International Standard sets out procedures for the following types of straight-line braking tests:
utilization-of-adhesion…
Secondary cells and batteries - Monitoring of lead acid stationary batteries - User guide
This IEC Guide is applicable to lead-acid vented and valve regulated batteries, for use in Stationary Battery applications. The object of the guide is as follows: · To assist users in the selection of methods to obtain sufficient information to indicate the state of health of an operating stationary lead-acid battery. · To achieve this by describing characteristics that can be electrically…
Commentary on CSA Standard Z662-99, Oil and Gas Pipeline Systems
1. Scope
1.1
The scope statement indicates which aspects and parts of pipeline systems and which service fluids are
covered by the Standard.
? Carbon dioxide was added as a new service fluid in 1996. The definition of gas was changed in 1983 to accommodate the coverage of gaseous service fluids other than fuel gas and sour gas; however, until 1996, none had been added.
? The carbon…
1.1 Scope
1.1.1 This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions),hereinafter referred to as appliances, constructed entirely of new, unused parts and materials:
a. For use with natural gas;
b. For use with liquified petroleum (propane);
c. direct vent appliances for manufactured home (USA only) or mobile home OEM installation…
Handling of Waste Materials in Health Care Facilities and Veterinary Health Care Facilities
1. Scope
Note: In many guidelines, all waste contaminated with blood or body fluids is classified as biomedical waste. This enormously increases the volume of waste requiring expensive handling and disposal. Identical items of waste are disposed of from homes with no special handling or decontamination.
The identification of every client who carries a blood borne pathogen including, but…
Manual for the Selection and Installation of Backflow Prevention Devices/Manual for the Maintenance ...
B64.10-01
1. Scope
1.1
This Standard provides requirements for the selection and installation of backflow prevention devices. Additional information on how backflow due to back siphonage and back pressure occurs, and on the selection and application of specific devices, is included in Appendices A, B, and C.
1.2
This Standard does not include requirements for materials, construction,…
Ethylene Oxide Sterilizers for Health Care Facilities
1. Scope
Caution: ETHYLENE OXIDE IN LIQUID AND VAPOUR FORM IS ACUTELY TOXIC AND HAS BEEN CLASSIFIED AS A HUMAN CARCINOGEN BY THE INTERNATIONAL AGENCY FOR RESEARCH ON CANCER. FOR PROVISION OF ADEQUATE PROTECTION AGAINST THESE EFFECTS, REFER TO FEDERAL AND PROVINCIAL REGULATIONS AND TO CSA STANDARD Z314.9.
1.1
This Standard applies to ethylene oxide sterilizers that have automatic controls…
Effective Sterilization in Health Care Facilities by the Ethylene Oxide Process
1. Scope
Caution: ETHYLENE OXIDE IN LIQUID AND VAPOUR FORM IS ACUTELY TOXIC AND HAS BEEN
CLASSIFIED AS A HUMAN CARCINOGEN BY THE INTERNATIONAL AGENCY FOR RESEARCH ON
CANCER. FOR PROVISION OF ADEQUATE PROTECTION AGAINST THESE EFFECTS, REFER TO
FEDERAL AND PROVINCIAL REGULATIONS AND TO CSA STANDARD Z314.9.
1.1
This Standard outlines essential elements in a program for using ethylene…
Installation, Ventilation, and Safe Use of Ethylene Oxide Sterilizers in Health Care Facilities
1. Scope
1.1
This Standard is intended to assist health care facilities using ethylene oxide as a sterilant, installing new ethylene oxide sterilization equipment, or modifying existing equipment in meeting government regulations on exposure and worker safety respecting the use of ethylene oxide gas.
This Standard addresses basic issues associated with the safe use or operation of…