Air quality — Determination of time-averaged mass emissions and emission factors — General approach
ISO 11771:2010 specifies a generic method for the determination and the reporting of time-averaged mass emissions from a specific installation or of a family of installations (or common source type), using data collected by measurements, and by establishing: mass emission rates by the simultaneous measurement of concentration and gas flow, using standardized manual or automatic methods, and also…
Vannes de régulation des processus industriels - Partie 7: Grille de définition de vanne de régulati...
La CEI 60534-7:2010 fournit une liste d'exigences généralement nécessaires à la définition de la majorité des vannes de régulation de processus. Il n'a pas été envisagé d'établir une liste exhaustive de toutes les exigences possibles pour tout processus concevable. La liste est disposée de manière à aider le rédacteur de la spécification par une présentation normalisée des données…
Safe installation and operation of hemodialysis and peritoneal dialysis in a home setting
Preface
This is the first edition of CSA Z364.5, Safe installation and operation of hemodialysis and peritoneal dialysis in a home setting.
Introduction
Since the introduction of home hemodialysis and peritoneal dialysis (home dialysis) to Canada more than thirty years ago, these technologies have developed into an increasingly important treatment option for clients with renal disease. The…
STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) – DESIGN APPLICATION
This Standard contains requirements for the design, selection and application of exterior cladding utilizing Exterior Insulation and Finish Systems (EIFS) that meet the requirements of CAN/ULC-S716.1, and for the interfaces between EIFS and other building components.
This Standard applies only to EIFS used in combination with a drained air space and liquid applied water resistive barrier (LA-…
Méthode d’essai pour mesurer les pertes de chaleur des chauffe-eau instantanés au gaz
1 Domaine d’application
1.1
Cette norme énonce le mode opératoire pour l’essai de simulation de fonctionnement de 24 heures des
chauffe-eau instantanés au gaz. La norme présente également des méthodes de calcul permettant de
déterminer
a) le débit maximum en L/min (gal US/min) ;
b) l’efficacité de récupération (l’efficacité thermique) ;
c) la consommation d’énergie quotidienne pour le chauffage…
1 Scope
1.1
This Standard applies to deadfront indoor enclosed and outdoor enclosed assemblies of switchgear
devices such as
(a) switches;
(b) interrupting devices;
(c) air circuit breakers;
(d) power circuit breakers; and
(e) control, metering, protective, and regulating equipment with associated interconnections and
supporting structures.
1.2
This Standard covers equipment with a nominal…
Automatic vehicle and equipment identification — Electronic registration identification (ERI) for ve...
ISO 24534-3:2010 provides requirements for electronic registration identification (ERI) that are based on an identifier assigned to a vehicle (e.g. for recognition by national authorities) suitable to be used for:
electronic identification of local and foreign vehicles by national authorities;
vehicle manufacturing, in-life maintenance and end-of-life identification (vehicle life cycle…
Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie ...
La CEI 61010-1:2010 spécifie les exigences générales de sécurité pour les types suivants d'appareils électriques et leurs accessoires où qu'ils soient destinés à être utilisés.
a) Appareils électriques d'essai et de mesurage
b) Appareils électriques de contrôle de procédés industriels
c) Appareils électriques de laboratoire
Cette troisième édition annule et remplace la seconde…
Electronic fee collection — Test procedures for user and fixed equipment — Part 1: Description of t...
ISO/TS 14907-1:2010 specifies the test procedures of EFC road-side equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically.
ISO/TS 14907-1:2010 is restricted to systems operating within the radio emission, EMC regulations, traffic and other…
Environmental monitoring programs at Class I nuclear facilities and uranium mines and mills
Scope
1.1 Facilities
1.1.1 Types of facilities
1.1.1.1
This Standard addresses the design and operation of EMPs for Class I nuclear facilities and uranium mines and mills. These facilities include
(a) nuclear reactors;
(b) uranium mines, mills, refineries, and conversion plants;
(c) uranium fuel fabrication plants;
(d) isotope-processing facilities;
(e) particle accelerators; and…
