1 Scope
1.1
This Standard applies to automatically operating gas-fired central furnaces (see Clause 3), hereinafter
referred to as furnaces, for installation in residential, commercial, and industrial structures including
furnaces for direct vent, recreational vehicle, outdoor, and manufactured (mobile) homes. These
furnaces can include a cooling unit. All units are to be constructed…
Standard for manually operated metallic gas valves for use on piping systems up to 5 psig
1 Scope
1.1
This Standard applies to newly produced manually operated metallic gas shut-off valves, hereinafter referred to as valves, constructed entirely of new, unused parts and materials that
a)
are for indoor/outdoor installation;
b)
are for use in the gas piping between the outlet of the gas distributor's meter and the inlet connection of the pressure regulator installed upstream…
This document describes criteria and procedures for acoustic classification of dwellings.
The purpose of this document is to make it easier for developers to specify a classified level of acoustic quality for a dwelling, and help users and builders to be informed about the acoustic conditions and define increased acoustic quality. The document can also be applied as a general tool to characterize…
Industrial furnaces and associated processing equipment — Safety requirements for steel converter an...
This document applies for new steel converter and its associated equipment (hereinafter referred to as converter plant) used in the process of carbon or stainless steel making as defined in 3.1 and illustrated in Annex B.
This document deals with significant hazards, hazardous situations and events relevant to the converter plant. It covers the intended use and foreseeable misuse.
This document…
1 Scope
1.1 General
This Standard establishes minimum requirements for pressure relief devices intended for use on fuel containers that comply with CSA/ANSI HGV 2, CSA B51, Part 2, or SAE J2579.
Pressure relief devices designed to comply with this Standard are intended to be used with hydrogen fuel complying with SAE J2719 or ISO 14687.
Pressure relief devices may be of any design or…
Ships and marine technology — Pressure-vacuum valves for cargo tanks and devices to prevent the pass...
This document is applicable to pressure-vacuum valves and to devices to prevent the passage of flame, both protecting cargo tanks, that can be subject to explosive gas/vapour and/or to gas/vapour pressure or vacuum beyond the design parameters of the system/tank. It specifies the minimum requirements for performance and testing. It also specifies design and in-service performance criteria,…
Safety of primary and secondary lithium cells and batteries during transport
IEC 62281:2019+A1:2021 specifies test methods and requirements for primary and secondary (rechargeable) lithium cells and batteries to ensure their safety during transport other than for recycling or disposal. Requirements specified in this document do not apply in those cases where special provisions given in the relevant regulations, listed in 7.3, provide exemptions. NOTE Different standards…
1 Scope
1.1
This Standard applies to newly-produced torches for use with propane, butane, natural gas, and MPS
(methyl acetylene-propadiene stabilized). This Standard applies to torches that aspirate atmospheric air
for combustion.
1.2
This Standard applies to hand-held torches intended for industrial applications such as brazing,
soldering, pre-heating for welding, heat treatment, and…
Moderating the effects of permafrost degradation on existing building foundations
1 Scope
1.1 Mitigation strategies and other actions
This Standard covers the following strategies to maintain permafrost or mitigate permafrost degradation related to existing buildings or structures:
a)
site techniques that consist of
i)
site grading and drainage;
ii)
snow management; and
iii)
shading or albedo change.
b)
foundation techniques that consist of
i)
ventilation;
ii)…
1. SCOPE
1.1 This Voluntary Product St1.andard primarily establishes structural criteria for assessing the acceptability of wood structural panels for construction sheathing and single floor applications and provides a basis for common understanding among the producers, distributors, and the users of these products. The standard does not address non-structural issues such as resistance to…