Traitement de l'information - Échange de données sur cartouche pour bande magnétique de 6,30 mm...
L'ISO 8063 spécifie les caractéristiques d'une cartouche pour bande, utilisant une bande magnétique de 6,30 mm (0,25 in) de large pour l'échange de données entre des systèmes de traitement de données. L'ISO 8063/1 spécifie les caractéristiques dimensionnelles, physiques et magnétiques de la cartouche, ainsi que l'agencement des pistes. La présente partie de l'ISO…
Information processing - Data interchange on 6,30 mm (0.25 in) wide magnetic tape cartridge using IM...
Specifies the quality of recorded signals as well as the track format of a magnetic tape cartridge with a magnetic tape width of 6,30 mm (0,25 inch) using the IMFM method of recording at 252 ftpmm (6 400 ftpi) for data interchange between data processing systems in the start/stop mode.
Traitement de l'information — Échange de données sur cartouche pour bande magnétique de 6,30 mm...
L'ISO 8063 spécifie les caractéristiques d'une cartouche pour bande, utilisant une bande magnétique de 6,30 mm (0,25 in) de large pour l'échange de données entre des systèmes de traitement de données. L'ISO 8063/1 spécifie les caractéristiques dimensionnelles, physiques et magnétiques de la cartouche, ainsi que l'agencement des pistes. La présente partie de l'ISO…
Information processing — Data interchange on 6,30 mm (0.25 in) wide magnetic tape cartridge using IM...
Specifies the quality of recorded signals as well as the track format of a magnetic tape cartridge with a magnetic tape width of 6,30 mm (0,25 inch) using the IMFM method of recording at 252 ftpmm (6 400 ftpi) for data interchange between data processing systems in the start/stop mode.
Concrete tests — Test specimens — Part 2: Making and curing of test specimens for strength tests
Specifies methods of making and curing test specimens for strength tests. Covers also moulds, compaction of the concrete, marking and transport of test specimens and the test report. Information gained from testing the specimens is intended for use in the assessment of concrete production, both by the supplier and/or the customer.
Metallic coatings — Electroplated coatings of zinc on iron or steel
This second edition cancels and replaces the first edition (i. e. ISO 2081:1973). Is not applicable to coatings applied to sheet, strip or wire in the unfabricated form, to close-coiled springs, for other than protective or decorative purposes. Includes information to be supplied by the purchaser to the electroplater and requirements for heat treatment. Coating thickness of threaded components:…
Metallic coatings — Electroplated coatings of cadmium on iron or steel
This second edition cancels and replaces the first edition (i. e. ISO 2081:1973). Contains a caution because cadmium is toxic! ISO 2082 is not applicable to coatings applied to sheet, strip or wire in the unfabricated form, to close-coiled springs, for other than protective or decorative purposes. Includes information to be supplied by the purchaser to the electroplater and requirements for heat…
Disposition des touches des machines à écrire utilisées pour le français et
l'anglais
Uniformiser la disposition des touches sur les claviers des
machines à écrire utilisées pour le français ou l'anglais. Elle
traite uniquement des touches utilisées dans le préparation de
textes écrits en français ou en anglais. Elle ne vise pas les
touches de fonction, et ne précise aucune exigence spécifique
pour les terminaux et systèmes de traitement de l'information et
de…
Fluid Supply and Monitoring Systems for Hemodialysis
1. Scope
1.1 General
This Standard applies to
(a) reagents and apparatus for preparing dialysing fluid;
(b) monitors of the dialysing fluid;
(c) accessories for monitoring the extracorporeal blood circuit; and
(d) blood pumps, infusion, and single needle systems.
Notes:
(1) Examples of reagents and devices included within the Scope of this Standard
are dialysis concentrate and…
Vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic definitions ...
Provides basic concepts with comments and identifies the calibration tests, environmental tests and physical measurements necessary to determine the suitability of impedance heads, force transducers and response transducers. Is limited to information which is basic to various types of driving point and transfer mobility, accelerance and dynamic compliance measurements.
