Rechercher

1 Scope 1.1 Inclusions This Standard specifies design and performance requirements for trench drains, utility channels, and grate systems that are used inside of, or adjacent to, building structures that are typically non- residential. Note: These channels are not typically subject to high-speed vehicles but can be subjected to concentrated heavy loads such as hard-wheeled forklifts. 1.2…

1 Scope 1.1 Inclusions This Standard specifies minimum requirements for the design, installation, examination, and testing of siphonic roof drains. It includes definitions of terms and parameters involved in the design of siphonic drainage systems. This Standard applies to roof drains designed and manufactured for installation in piping systems that are intended to operate under depressurized…

1 Scope 1.1 Inclusions This Standard covers cleanouts, including floor and wall types, used in concealed piping in and adjacent to residential, commercial, industrial, institutional, and other buildings open to the public. 1.2 Illustrations Figure 1 included in this Standard is intended only to describe and portray typical floor and wall type cleanouts and is not intended to restrict design…

1 Scope 1.1 Inclusions This Standard specifies material, design, construction and performance criteria for the testing and rating of grease interceptors equipped with automatic grease removal devices (GRD) and it applies to GRDs designed to automatically remove free-floating fats, oils, and grease (FOG) from sanitary discharges without intervention from the user except for maintenance. 1.2…

Scope Replacement: This part of IEC 60730 applies to automatic electrical BURNER CONTROL SYSTEMS for the AUTOMATIC CONTROL of burners for oil, gas, coal or other combustibles intended to be used • for household and similar use, • in shops, offices, hospitals, farms and commercial and industrial applications. This International Standard is applicable • to a complete BURNER CONTROL SYSTEM…

1 Scope 1.1 This Standard applies to non-conductive optical fiber cable and conductive optical fiber cable intended to be installed indoors in non-hazardous locations in accordance with CSA C22.1, Canadian Electrical Code, Part I. This Standard provides performance requirements for products installed in accordance with Section 56 of the Canadian Electrical Code, Part I. 1.2 This Standard…

1 Scope 1.1 Inclusions This Standard specifies construction and marking requirements, as well as the performance criteria for the testing and rating of hydromechanical grease interceptors, rated by flow in litres per minute and gallons per minute. 1.2 Exclusions This Standard does not apply to interceptors intended for rainwater, sanitary wastewater, or wastewater containing petroleum…

Domaine d’application 1.1 Généralités Cette norme prescrit les exigences minimales en matière de conception, construction, exploitation, entretien et interventions en cas d’urgence pour l’entreposage, la manutention et la distribution des carburants aviation dans les aérodromes. 1.2 Inclusions Cette norme énonce des exigences visant à : a) assurer la sécurité des employés des aérodromes et…

This document establishes a model for affective computing user interfaces (AUI). Annex B also suggests topics for AUI standardization. This document does not specify the implementation of affective computing.

This document establishes a model for affective computing user interfaces (AUI). Annex B also suggests topics for AUI standardization. This document does not specify the implementation of affective computing.