1 Scope
1.1 Application
This Standard applies to
a) oil burners of the atomizing type (irrespective of size, firing rate, or grade* of fuel oil) that are
designed primarily for installation in warm-air, hot-water, and steam-heating equipment;
* The grade of fuel oil should be as specified in CSA B140.0, except for grade B6-B20, which is specified in
ASTM D396.
b) atomizing-type oil burners…
1 Scope
1.1 Application
This Standard applies to complete, vent- (flue-) connected, or direct vent connected oil-fired warm air furnaces and unit heaters, irrespective of the heating capacity or the type of burner used. This Standard also applies to oil-fired condensing warm air furnaces.
1.2 Intent
This Standard applies to furnaces employing forced circulation of the heated air and furnaces…
1 Scope
1.1 Application
This Standard applies to
a)
complete vent (flue) -connected or direct-vent connected, oil-fired steam, and hot-water boilers that are provided with automatic control devices;
b)
oil-fired steam and hot-water condensing boilers;
c)
boilers having an input of less than 117.2 kW (400 000 Btu/h);
d)
low-pressure boilers (as defined in Clause 3) having an input of 117…
Oil-fired service water heaters for domestic hot water, space heating, and swimming pools
1 Scope
1.1 Intent
This Standard applies to complete flue-connected, oil-fired service water heaters that are provided with automatic control devices. These service water heaters may be used both for heating and for supplying of domestic hot water. They are not intended to be used as sole-source heating appliances.
1.2 Application
The requirements in this Standard apply to
a)
service water…
Entreposage, manutention et distribution des carburants aviation dans les aérodromes
Domaine d’application
1.1 Généralités
Cette norme prescrit les exigences minimales en matière de conception, construction, exploitation, entretien et interventions en cas d’urgence pour l’entreposage, la manutention et la distribution des carburants aviation dans les aérodromes.
1.2 Inclusions
Cette norme énonce des exigences visant à :
a)
assurer la sécurité des employés des aérodromes et…
1 Scope
1.1
This Standard provides procedures for evaluating polymeric materials and parts made from polymeric materials intended for application in electrical equipment covered by the Canadian Electrical Code, Part II (CE Code, Part II), with respect to:
a)
flammability;
b)
mechanical properties;
c)
thermal properties;
d)
resistance to weathering; and
e)
electrical properties.
1.2…
1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for floor drains, adjustable floor drains, and area drains that are used inside of, or adjacent to, building structures. Drains of outlet NPS-2 and smaller, intended only for installation in shower areas, are covered in this Standard and in ASME A112.18.2/CSA B125.2 as well.
1.2 Exclusions
This Standard does…
1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for roof drains. This Standard applies to the following types of roof drains:
a)
general purpose;
b)
gutter and cornice;
c)
parapet and promenade;
d)
balcony; and
e)
deck.
1.2 Exclusions
This standard does not apply to siphonic roof drains covered under ASME A112.6.9/CSA B79.9.
1.3 Illustrations…
1 Scope
1.1 Inclusions
This Standard covers sanitary floor sinks and specifies requirements for materials, construction, inspection, testing, and marking.
Note: In this Standard, sanitary floor sinks are generally referred to as “floor sinks”.
1.2 Exclusions
This Standard does not include floor drains covered in ASME A112.6.3/CSA B79.3.
1.3 Terminology
In this Standard, “shall” is used to…
1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for trench drains, utility channels, and grate systems that are used inside of, or adjacent to, building structures that are typically non- residential.
Note: These channels are not typically subject to high-speed vehicles but can be subjected to concentrated heavy loads such as hard-wheeled forklifts.
1.2…
