Information Processing Systems - Open Systems Interconnection - Basic Connection Oriented Session P...
This National Standard is equivalent to International Standard ISO 8327:1987.
It specifies:
a) procedures for a single protocol for the transfer of data
and control information from one session entity to a peer session
entity;
b) the means of selecting the functional units to be used by the
session entities;
c) the structure and encoding of the session protocol data units
used…
1. Scope
1.1 This Standard applies to dry type, air-cooled transformers, autotransformers (fixed and variable), and primary-circuit reactors intended for use in, on, or associated with other approved equipment in capacities of 1000 kV·A and less and for primary voltages of 750 V or less, 60 Hz and less, and intended for use in nonhazardous locations in accordance with the Canadian…
1. Scope
1.1
This Standard applies to ac and dc motors with inherent overheating protection
designed to be used in accordance with the Rules of the Canadian Electrical
Code, Part I, as follows:
(a) motors with a voltage rating not exceeding 600 V and with a protective
device connected in the motor circuits;
(b) impedance protected motors with a voltage rating not exceeding 600 V; and
(c…
Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (new type) — Dimensions...
Lays down the mating dimensions and access clearance for a replenishment coupling. Describes the requirements for the coupling mating dimensions, the thread and access clearance, which shall be in accordance with those given in figures and tables.
Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (old type) — Dimensions...
Specifies the mating dimensions and access clearance. Is not applicable to new designs; for the latter, reference should be made to ISO 8775. The requirements apply to coupling mating dimensions, thread, plugging of orifice and access clearance.
Low-voltage switchgear and controlgear. Part 1: General rules.
Applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as 'equipment' and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.
It states those general rules and requirements which are common to low-voltage equipment as defined in Subclause 1.1, including for example:…
1. Scope
1.1 This Standard covers assemblies of wiring terminals and supporting blocks for copper conductors, copper and aluminum conductors, and aluminum conductors rated at a maximum of 1500 V and 2000 kcmil, intended to provide for the connection of wiring designed to be used in accordance with the Rules of the Canadian Electrical Code, Part I.
1.2 These terminal blocks are…
Industrial Locking Type, Special Use Attachment Plugs, Receptacles, and Connectors
1. Scope
1.1 This Standard applies to locking type plugs, receptacles, equipment power inlets and outlets, and connectors rated up to 60 A and up to 600 V ac or 250 V dc, for use in accordance with the Canadian Electrical Code, Part I.
1.2 The devices covered by this Standard are intended for use with copper conductors only in making readily detachable electrical connections utilizing a…
