Passenger cars — Wiper systems — Shaft ends and arm-holes
Specifies the main dimensions and general requirements for wiper arm to shaft end connections of wiper systems. Gives the preferred type 1; the normative annex A includes the non-preferred type 2.
Specifies the basic dimensions and access clearance. The basic dimensions shall be as specified in figure 1. The clearance allowed around the connector shall be in accordance with figure 2.
Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for ...
Applies to a group of related two-part connectors for printed boards for board-to-board and board-to-wire connection, with tin or gold plated contact area according to the style. The free or fixed board-mounted connectors are provided with terminations suitable for printed boards in accordance with IEC 60326 and using a grid of 2.54 mm (0.1 in) as laid down in IEC 60097.
Medical Electrical Equipment Part 1: General Requirements for Safety
This National Standard of Canada is based on International Standard IEC 601-1:1988.
NOTE - Amendment 2:1998 to this document was reaffirmed November 10, 2006.
It applies to the safety of MEDICAL ELECTRICAL EQUIPMENT (as defined in
Sub-Clause 2.2.15) designed to be installed and used in accordance with the
rules of the Canadian Electrical Code, Part I. Although this Standard is
primarily…
Connectors for frequencies below 3 MHz for use with printed boards. Part 9: Two-part connectors for ...
Covers a group of related two-part connectors for printed boards and cable connectors associated with printed backpanels. The group covers high-density connectors having up to 96 miniature contacts for low-voltage applications, connectors having up to 6 high current contacts, combined with up to 42 signal contacts and a range of 4, 10, 20 and 64 way female cable connectors and associated male…
Information technology — Communication interface connectors used in local area networks
Describes the medium interface connection device used between the terminal equipment and the trunk coupling unit for the trunk cable. Cables or wires used in conjunction with the connectors are not included.
Information technology - Communication interface connectors used in local area networks
Describes the medium interface connection device used between the terminal equipment and the trunk coupling unit for the trunk cable. Cables or wires used in conjunction with the connectors are not included.
Microprocessor system bus (VMSbus) - Serial sub-system bus of the IEC 60821 Bus (VMEbus)
Describes an interfacing method used to connect boards within a subrack, and an extended interfacing method used to connect subracks and standalone boards over limited distances. The interconnection of these boards and subracks is provided by a serial data medium. Should be used in conjunction with IEC 60821. Note: -For the price of this publication. please consult the ISO/IEC price-code list.
Bus système à microprocesseurs (VMSbus) - Bus sous-système série du Bus CEI 60821 (VMEbus)
Décrit une méthode d'interfaçage utilisée pour connecter des cartes à l'intérieur d'un châssis, ainsi qu'une méthode d'interfaçage étendue pour connecter entre eux des châssis et des cartes individuelles sur des distances limitées. L'interconnexion de ces cartes et châssis est effectuée par l'intermédiaire d'un support physique de données série. Doit être…
