Rechercher

1. Scope 1.1 This Standard applies to solid-state, single-phase motor speed controls, rated at 300 V and less, 20 A and less, designed to be used in circuits for the control of shaded pole, permanent split capacitor, or universal motors, and other motors suitable for use with this type of control, intended for use in nonhazardous locations in accordance with the Canadian Electrical Code,…

1. Scope 1.1 These requirements apply to signal equipment for supply voltages up to 600 V ac, both permanently and cord connected, intended for household and industrial use in non-hazardous locations, in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 The requirements are not intended to replace other requirements that are mandated by provincial or federal…

Fournit une gamme d'essais que l'on peut demander pour les revêtements constitués de gaines extrudées quand, en plus de la protection contre la corrosion des couches métalliques sous-jacentes, les revêtements doivent remplir des fonctions spéciales, pour les cas a) et b) suivants, telles que: a) dans les réseaux à écran isolé: i) emploi de connection spéciale d'écran, afin de…

1. Scope 1.1 General This Standard covers the load test procedure for evaluating the strength and deformation performance of wood roof trusses intended for use in housing and small buildings as defined in Part 9 of the National Building Code of Canada. Note: Part 9 of the National Building Code of Canada provides detailed requirements…

The document specifies all common test cases to be applied to and correctly handled by EVs (EVCC) and EVSEs (SECC) implementing ISO 15118-20 that are independent of a particular charging type (AC, DC, ACD, WPT charging). The document considers the use cases defined in ISO 15118-1:2019 The test system will comprise: - A simulated SECC to verify the correct behaviour of a real EVCC - A simulated…

Consists of B137.0, B137.1, B137.2, B137.3, B137.4, B137.4.1, B137.5, B137.6, B137.8, B137.9, B137.10, B137.11 and B137.12 B137.0-05 Definitions, general requirements, and methods of testing for thermoplastic pressure piping 1 Scope 1.1 This Standard specifies requirements for thermoplastic pressure piping. It includes reference publications, definitions, abbreviations, general…

This document defines the Form Post Response Mode. In this mode, Authorization Response parameters are encoded as HTML form values that are auto-submitted in the User Agent, and thus are transmitted via the HTTP POST method to the Client, with the result parameters being encoded in the body using the application/x-www-form-urlencoded format.

This document defines the Form Post Response Mode. In this mode, Authorization Response parameters are encoded as HTML form values that are auto-submitted in the User Agent, and thus are transmitted via the HTTP POST method to the Client, with the result parameters being encoded in the body using the application/x-www-form-urlencoded format.

This document specifies dimensions and requirements for high-pressure fuel pipe assemblies and assembled pipe sets made of seamless stainless steel or surface-treated steel tubing to be used with 60°concave cone connectors on gasoline (spark-ignition) engines.

This document specifies the Resources that have been defined by OCF that may be exposed by an OCF Device. Application profile device documents (for example those created for Smart Home or Healthcare) specify device types appropriate to the profile; such documents use Resource Type definitions from this document. This document is built on top of ISO/IEC 30118-1. ISO/IEC 30118-1 specifies the OCF…