Rechercher

This document specifies test methods for clamp-in tubeless tyre valves. These methods are defined to determine the minimum level of performance requested. This document applies to the tyre valve assembled on the rim hole with diameter of 11,3 mm for passenger cars or for light duty vehicles. This document does not include tyre pressure monitoring system (TPMS) valves.

This document comprises a methodology for determining a test plan to simulate a card's service life. The methodology defines two parameters of card service life: the expected card service life in years and the average number of uses per day. This document and ISO/IEC 24789-2, together along with ISO/IEC 10373-1 describe the evaluation methods to be used and their criteria. This document was…

This document specifies requirements, test methods and performance criteria for video fire detectors (VFDs), which operate in the visible spectrum, for use in fire detection and alarm systems installed in and around buildings (see ISO 7240-1). For the testing of other types of VFD working on different principles, this document can be used only for guidance. Detectors developed for the protection…

This document comprises a methodology for determining a test plan to simulate a card's service life. The methodology defines two parameters of card service life: the expected card service life in years and the average number of uses per day. This document and ISO/IEC 24789-2, together along with ISO/IEC 10373-1 describe the evaluation methods to be used and their criteria. This document was…

This document gives methods of determination of duration of load and creep factors under bending actions at ambient temperatures for a defined population of structural timber products such as solid timber, LVL, OSB, plywood, particleboard, I-beams calculated from test values. It presents methods for a)       determining the duration of load and creep factors for new timber products, b)      …

This document provides minimum requirements and test procedures for automated braking at velocities below 2,8 m/s (10 km/h) with the specific aim of avoiding or mitigating collisions with pedestrians, other road users (e.g. vehicles) and stationary objects, including infrastructure elements (e.g. walls, pillars). These collisions mainly occur during reversing manoeuvres, but this document also…

This document defines fundamental terminology for blockchain and distributed ledger technologies.

This document specifies a methodology for the design of experiments conducted in the built environment to collect data on evacuation for the following purposes: —     for use in fire safety engineering; —     for comparing different evacuation experiments realized in different jurisdictions and conditions; —     for studying one or more variables; —     for achieving a general overview of an…

Scope This National Standard of Canada defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I controls (see Figure 1 for a schematic representation). This standard does not…

1 Scope 1.1 Installation requirements for large oil-burning equipment This Code specifies minimum requirements for the installation of large oil-burning equipment. Note: The intent of this Code is to apply to multi-unit residential, commercial, institutional, and industrial buildings in accordance with the provincial building code or, in the absence of such regulation, the National Building…