Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the ...
ISO 16826:2012 defines the principles for tandem‑ and longitudinal-longitudinal-transverse (LLT) wave‑examination for the detection of discontinuities perpendicular to the surface.
The general principles required for the ultrasonic examination of industrial products are described in ISO 16810. A list of symbols and equations is given in ISO 16811.
The tandem‑ or LLT‑examination should be used for…
Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for ...
ISO 16828:2012 defines the general principles for the application of the time-of-flight diffraction (TOFD) technique for both detection and sizing of discontinuities in low alloyed carbon steel components. It can also be used for other types of materials, provided the application of the TOFD technique is performed with necessary consideration of geometry, acoustical properties of the materials,…
Non-destructive testing — Ultrasonic testing — General principles
ISO 16810:2012 defines the general principles required for the ultrasonic examination of industrial products that permit the transmission of ultrasound.
The specific conditions of application and use of ultrasonic examination, which depend on the type of product examined, are described in documents which could include: a) product standards; b) specifications; c) codes; d) contractual documents…
Communication networks and systems for power utility automation - Part 7-510: Basic communication st...
IEC/TR 61850-7-510:2012(E) provides explanations on how to use the Logical Nodes defined in IEC 61850-7-410 as well as other documents in the IEC 61850 series to model complex control functions in power plants, including variable speed pumped storage power plants. This publication is to be used in conjunction with IEC 61850-7-410 which introduced the general modelling concepts of IEC 61850 to…
Medical products containing viable human cells — Application of risk management and requirements for...
This International Standard specifies requirements and guidance for processing practices and managing risk
associated with viable cellular components of products regulated as medicinal products, biologics, medical
devices and active implantable medical devices, or combinations thereof. It covers viable human materials of
autologous as well as allogeneic human origin, obtained from living or…
Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose
ISO 11137-2:2011 specifies methods of determining the minimum dose needed to achieve a specified requirement for sterility and methods to substantiate the use of 25 kGy or 15 kGy as the sterilization dose to achieve a sterility assurance level, SAL, of 10-6. ISO 11137-2:2011 also specifies methods of sterilization dose audit used to demonstrate the continued effectiveness of the sterilization…
Indoor air — Part 28: Determination of odour emissions from building products using test chambers
This part of ISO 16000 specifies a laboratory test method using test chambers defined in ISO 16000-9 and
evaluation procedures for the determination of odours emitted from newly produced building products under
defined climate conditions. The method can also, in principle, be applied to aged products. This part of ISO 16000
is applicable to various test chambers used for the determination of…
Thermal performance of buildings — Calculation of internal temperatures of a room in summer without ...
ISO 13792:2011 specifies the required input data for simplified calculation methods for determining the maximum, average and minimum daily values of the operative temperature of a room in warm periods:
a) to define the characteristics of a room at the design stage in order to avoid overheating in summer;
b) to define whether the installation of a cooling system is necessary or not.
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part...
ISO 14839-4:2012: a) indicates a typical architecture of an active magnetic bearing (AMB) system so that users can understand which components are likely to comprise such systems and which functions these components provide; b) identifies the primary similarities and differences between AMB systems and conventional mechanical bearings; c) identifies the environmental factors that have significant…
Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
IEC 60811-100:2012 describes general requirements and considerations that are applicable to all the test methods given in the particular parts, unless otherwise specified. This first edition of IEC 60811-100 collects together general matters that apply to the restructured IEC 60811 series. A detailed explanation is provided in the Introduction. Annex A provides full information on the relation…
