Rechercher

1 SCOPE 1.1 This Standard sets forth minimum requirements for the material properties and performance of liners used for secondary containment under and around the area of tanks that are installed aboveground for the storage of flammable liquids and combustible liquids. 1.2 Liners used for secondary containment are intended for permanent installation to contain spills or leakage of product…

1 SCOPE 1.1 These requirements apply to organic lighting emitting diode (OLED) panels intended for portable or permanent installation in accordance with the CSA C22.1, Canadian Electrical Code, Part I, Safety Standard for Electrical Installations, and for connection to isolated (non-utility connected) power sources such as generators, batteries, fuel cells, solar cells, and the like. 1.2 The…

This standard applies to all charities registered with the Canada Revenue Agency that want to implement and maintain best management practices. This document was developed to serve as a reference document for conformity assessment activities of specific practices. NOTE — Conformity assessment is defined as the systematic examination of the extent to which a service fulfils specified…

1. SCOPE 1.1 Foods and other aquaculture products shall refer to organic production methods only if they comply with this standard and local regulations. 1.2 This standard applies to the following products to the extent that the principles of production and specific verification rules for them are described in the standard: a. Seaweeds and aquatic plants and seaweed and aquatic plant products…

IEC 62149-7:2012 covers the performance specification for 1 310-nm discrete vertical cavity surface emitting laser (VCSEL) devices of transverse single-mode and multimode types used for the fibre optic telecommunication and optical data transmission application in a form of the VCSEL chips mounted on a substrate with wire bonding to their chips' anode and cathode terminals without any fibre…

IEC 61755-3-6:2006+A1:2012 defines dimensional limits and material properties of a 2,5 mm and a 1,25 mm diameter cylindrical composite ferrule optical interface to meet specific requirements for APC fibre-to-fibre interconnection. This consolidated version consists of the first edition (2006) and its amendment 1 (2012). Therefore, no need to order amendment in addition to this publication.

This International Standard specifies minimum requirements for instruments and systems that fall into the class of corneal topographers (CTs). It also specifies tests and procedures to verify that a system or instrument complies with this International Standard and thus qualifies as a CT according to this International Standard. It also specifies tests and procedures that allow the verification…

IEC/TR 62730:2012(E) is applicable to polymeric insulators whose insulating body consists of one or various organic materials. Polymeric insulators covered by this technical report include both solid core and hollow insulators. They are intended for use on overhead lines and in indoor and outdoor equipment with a rated voltage greater than 1 000 V. The object of this technical report is: - to…

IEC/PAS 62734:2012(E) defines the OSI layer specifications (e.g., PhL, DL, etc.), security specifications, and management (including network and device configuration) specifications for wireless devices serving application classes 1 through 5 and optionally class 0 for fixed, portable, and moving devices. It addresses the performance needs for periodic monitoring and process control where…

1 Scope This part of ISO 21672 specifies general requirements and test methods for periodontal probes. It is applicable to periodontal probes made of austenitic and martensitic stainless steel. It is not applicable to periodontal probes with working ends made completely of plastics, nor to HAUER probes and periodontal probes with a defined probing force.